Hey guys just wanted to see where we stand with the [color=rgb(40,40,40);font-family:helvetica, arial, sans-serif;]Netduino Plus 1 [/color]and the new firmware.
New: Netduino 4.3 SDK and VS2012 support!
#42
Posted 11 August 2013 - 03:47 AM
#43
Posted 11 August 2013 - 03:49 AM
When we tested .NET MF 4.3 on Netduino Plus 1, it was a bit too big. Once 4.3 QFE1 comes out, we'll be tweaking the configuration to see if we can squeeze it onto the gen1 hardware.Hey guys just wanted to see where we stand with the [color=rgb(40,40,40);][font="helvetica, arial, sans-serif;"]Netduino Plus 1 [/color][/font]and the new firmware.
Chris
#44
Posted 11 August 2013 - 03:37 PM
I suppose the current 4.3 fits well in the Netduino Plus 2, right? Is that the lowest platform the 4.3 NETMF fits?
#45
Posted 12 August 2013 - 09:06 AM
I suppose the current 4.3 fits well in the Netduino Plus 2, right? Is that the lowest platform the 4.3 NETMF fits?
Correct
See the 4.3 Beta 1 thread in the Firmware sub forum http://forums.netdui...re-v430-beta-1/
Nak.
#46
Posted 20 August 2013 - 04:52 PM
I installed the 4.3 SDK and needed to use the UdpClient. According to the MSDN it is in the System.Ext.Net namespace of mfpwsextensions.dll (something like that) but when I add that reference I don't see that namespace. Can't find UdpClient anywhere.
#47
Posted 23 August 2013 - 07:40 AM
Hi Chris,
When are you going to support the lwIP networking stack on the n+2?
/Michael
#48
Posted 24 August 2013 - 04:54 AM
I keep getting a message debug device not in a debug state, rebooting, and then Debugger engine could not attach to debugging target. How can i fix this, I have done the power reset
“I have not failed. I've just found 10,000 ways that won't work.”
? Thomas A. Edison
#49
Posted 24 August 2013 - 05:26 AM
Netduino Plus 2 supports the lwIP networking stack today. It's built in There is an update to lwIP that's coming with NETMF 4.3. It's already in the 4.3 PK but there are some bugs that need patched before we can adopt it. Once the PK is patched, we'll update the Netduino Plus 2 firmware to take advantage of all the latest lwIP bug fixes. ChrisWhen are you going to support the lwIP networking stack on the n+2?
#50
Posted 24 August 2013 - 05:27 AM
Are you using the 4.3 beta firmware on your board and the 4.3 beta SDK on your development machine? If so, try switching to the legacy MFUSB drivers. If that doesn't work, I recommend sticking with the production (4.2) firmware for now. ChrisI keep getting a message debug device not in a debug state, rebooting, and then Debugger engine could not attach to debugging target. How can i fix this, I have done the power reset
#51
Posted 24 August 2013 - 05:49 AM
Hi Chris, I have now gone back to the production build 4.2 but was just using the 4.3 beta firmware, 4.3 sdk and 4.3 netmf sdk. On the Netduino Plus 2. Unsure what was causing the issues. Thank you for your help.
“I have not failed. I've just found 10,000 ways that won't work.”
? Thomas A. Edison
#52
Posted 03 September 2013 - 05:08 AM
Is there any news on when to expect the next (and maybe final?) release of the 4.3 Firmware?
Right now I'm experience some strange behavior in TCP/IP communication. And I'm not sure if it's my code or maybe caused by lwIP in the 4.3 beta firmware. So having a final, stable IP stack would really help in narrowing that down ;-)
BTW: I'm stuck with 4.3 since I'm using VS2012 (wouldn't like to downgrade from that).
#53
Posted 03 September 2013 - 06:55 PM
That's the firmware that is on the netduino device or the one that one installs aside VS.2013 (SecretLabs*.dll) ?
#54
Posted 08 September 2013 - 09:17 AM
unfortunatly it is not possible for me anymore to debug after deploying to the Netduino with my VS2012 prof. I have tried un-install of VS and drivers etc more than one time. clean the register, nothing works. Only a blue led burns after deploying and the Netduino do nothing, I know for sure that it the driver is the issue.
When I start VS 2010 everything works well under 4.2 ....... .
The problem did start when I went back in VS2012 from 4.3 to 4.2.2 to make a HEX file. In the past i did it several times without any problems.
#55
Posted 04 October 2013 - 12:00 AM
Has anyone gotten firmware deployment tool (DtuSe Demo v3.0.3) to work under windows 8? i've tried it on two machines and it fails during upload on each machine. i get a DtuSe Demo has stopped working dialog box.
#56
Posted 04 October 2013 - 12:47 AM
got this to work for me. had to make sure "verify" was unchecked, then it didn't crash. hope that helps someone.
#57
Posted 08 November 2013 - 09:02 PM
Chris,
What are you hearing from Microsoft about the future of NETMF? There is very little new on their sites in nearly a year and I have read comments that the project has been moved to China for maintenance only and not development.
I have 2 N+ and 2 N2+ and am working on a major, perhaps commercial project, but I don't want to get too far down the rabbit hole just to have it cave in.
Any insight that you can offer would be greatly appreciated.
Thanks,
Glen
#58
Posted 12 November 2013 - 01:44 PM
--
Asbjørn
#59
Posted 13 November 2013 - 07:53 AM
Blog comment that is not very encouraging:
MF was moved to China as a maintenance project. US dev team is gone. Not likely to see much future development.
#60
Posted 13 November 2013 - 08:16 AM
--
Asbjørn
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users