Is the Netduino2 Source code for the 4.3 version available somewhere?  I need to compile a firmware with the EnableGCMessages turned on.  

Would love to get my hands on the source for 4.3 as well, also the source for 4.2.2.2 would be great, the one on the downloads page according to the *.settings file is 4.2.2.1.

 

Nak.

Hi Supra

TX from the GO goes to RX on the on the module and vice versa, admittedly its confusing but if you look at the go schematic you will see pin 4 is TX on the go, so pin 4 on the module would be RX.

i.e. the transmission (tx) from the go on pin 4 is received (rx) on pin 4 of the module, whilst the module transmits on pin 5 and is received by the go on pin 5.

You find the TX to RX naming/wiring convention being used in lots of 2 wire/channel transmission protocols, such as RS232, MIDI, DMX (i think) etc. etc.

It can also help to think of TX = out and RX = in, and that you need to go out to come in

Hope that helps

Nak.

Hi Gomore These are really good and under $200 http://www.saleae.com/logic/ I have one of these http://www.ikalogic....s/scanalogic-2/ and find it to be invaluable and it was pretty cheap as well < $60 As for the CS line are you using the SPI object or still trying to bit bang the interface? Bitbanging will probably be to slow but if you take the command and control logic out of the arduino code and use it in C# with the spi objects it "should" just work... Nak.

I suppose the current 4.3 fits well in the Netduino Plus 2, right? Is that the lowest platform the 4.3 NETMF fits?

Correct

 

See the 4.3 Beta 1 thread in the Firmware sub forum http://forums.netdui...re-v430-beta-1/

 

Nak.

Hey guys, bit late to the party but I am keen to get involved. I can see uses for GUI, cli and msbuild tasks.. Ultimatley as long as the core assembly has a well documented API the creation of of the cli and msbild tasks is a stubbing excercise. I would be very keen to see ways/develop easier ways to get nd's integrated into CI (continuous integration) systems. Another thing that would be awesome to make happen would be parallel deployments I.e. Flashing a usb hub full of nd's for production purposes. Nak.

Look what I stumbled across and thought of you lot. Just pretend to be interested in Fluke Thermal Imaging and they'll send you a 2GB card full of info about it. It might be EU only judging by the URL.
http://eupromo.fluke...uken&product=sd

Nice find, now waiting for my fluke branded micro to SD adaptor to arrive (the 2gb card will be useful as well, just a sucker for branded generic adaptors)...

Revised: It worked if I moved to another USB port (??!?!).


After SAM-BA has detected the USB driver and I've selected at91sam7x512-ek and then click "Connect", SAM-BA pops up "Error in startup script" "Error h_handle returned zero" etc.

I'm using Windows 7 64, .NET 4.2 and SDK 4.2.

Any idea what could cause this to happen?

Cheers,
Anders

Hi Anders

Are you using SAM-BA 2.12 fixes some issues with x64 os's...
Also are you using the driver in "drv" folder where you installed sam-ba too or the generic GPS camera driver that windows update discovers, try uninstalling the driver in device manager and manually installing the Atmel driver?
Finally have you erased your ND (3.3v to the gold erase pad) before you try and connect with sam-ba?

Nak.

I agree... I have had a hard time finding 2gig cards. I am sure I can probably find them online, but if I want to produce my ND+ based product and sell it without the SD and allow the customer to buy their own SD Card, it needs to support larger than 2gig. It really is embarrassing for the ND+ to not support anything larger. My video camera, trap camera, voice recorders and many other tools I use for Paranormal Investigation all support large cards (I even have 32gb in some).

How hard is it to get this problem resolved once an for all. This has been one of my holdups on continuing with my project as I might need to reconsider the use of the ND+ in my product and go with another type of board simply for the SD support.

I believe the crux of the problem is to do with licensing, high capacity SD cards requires a patent to be licensed, which would then cause problems for the open source aspect of the ND. Even if the appropriate licenses were obtained then the firmware couldn't be open sourced, and the cost of the license would also be passed on to all purchasers of an ND. Which IMHO wouldn't be worth while due to the loss of aspects of open source, and the easy availability of 2gb micro sd cards, Amazon carry hundreds, as do most large component suppliers, also i suspect the licensing costs and thus the rise in price of an ND would be considerably more than the cost of a 2gb micro sd with shipping included.

Nak.

Thank. It is S-U-X socket?

As stated on the previous page a S-U-X socket (plus a few more letters if im being pedantic, as gadgeteer has more than S,U & X type sockets) as you insist on calling it, is nothing more than a generic 0.05" pitch IDC shrouded header. Outside of the gadgeteer (and by association the wider netmf community) *nobody* would have a clue what you are on about. For further proof i offer you this google search the only reference to a S-U-X socket is one of the last results and is one of your previous posts on this thread!, you are of course free to keep calling it that if you will, but most people wont have a clue what you are on about. As Stefan stated this sort of socket is used for many hundreds if not thousands of applications with a tiny percentage of their use being on GO and Gadgeteer boards.

The main issue with them for hobbyists is that they are very difficult to source in small quantities at a reasonable price from the major worldwide component distributors (i am not including hobbyist sites as unless they operate out of your country of residence the shipping costs can be excessive) carry them in small quantities usually you have to buy in multiples of 100 at ~$2 a piece (Farnell and RS dont stock them as far as i know, or are very expensive i.e. > $2 a piece which is nuts when the MCU on your module costs less than the socket!!!, Mouser and Digikey do i believe).

Nak.

Any chance of getting the Eagle part for the two headers published as a library? Either that or a pointer to the part name and library would help - I've not been able to find the part in Eagle's libraries.

Regards,
Mark

Im currently building a netduino library for design spark
Currently contains:

• Shield headers (at correct spacing)
• STM32F4
• STM32F0
• STM8S (will add dip varient as well)
• Go sockets
• Handful of common components

Its not eagle i know, but i have used pulsonix (which shares the same core) in the past, and its free with no layer or pad limit.
Any way i was considering porting the lib to Eagle and Kicad as well, if there is enough interest i will see what i can do.

Nak.

i have found solder with a diameter of 0.5mm or below works well. If you can get hold of the really thin .3mm solder without buying a whole spool (its quite pricey) then do so you will not regret it :-) Nak.

sure I will finish it up tonight and post a link when done

What's type of GO! Sockets?

It is called SUX socket?

Technically speaking a Go (or Gadgeteer) socket is just a 0.05" (1.27mm) pitch header i.e. a grid of pins with 0.05" between centers, nothing special, just pretty damn hard (impossible) to find in small quantities at a reasonable price, other than as engineering samples which is not a viable option if you need more than 10 of them.

Nak.

The first post has been updated, Wouldn't be very helpful to post multiple copies of a work in progress, just update the authoritative source at the top, then people can reliably get the most up to date copy Nak.

Awesome stuff Chris!

Cant wait to get stuck into building some modules!

Keep up the good work.


update
Initial comments on the beta documentation are as follows:

• Should have a table on contents
• Possibly worth putting a "Beta" watermark on all pages, save hassle of someone printing a copy then discovering that the docs were out of date?
• Page numbers (especially helpful for people posting feedback to be able to refer to the exact page...)
• Some message exchange diagrams would be invaluable to help people get their heads around correct sequence of operations/application.

Hopefully these comments wont be taken negatively, just some thoughts for improvement



Nak.

(ps. now feels honoured that he has a frame type named after himself )

@ChrisU said , With Shield Base, we also introduced the GoBus Virtual I/O concept. With GoBus 1.5, we're performance-optimizing that same Virtual I/O and bringing it to all GoBus modules.

So i ordered last tuesday. My item will be arriving today. Do i have to get new shield base v1 .5?

Btw, I was reading gobus protocol specification. Thank

Hi Supra

Its a software change not a hardware change.

Nak.

Will we be ordering the STM8S105K4B6 5-packs direct from Secret Labs, or through the regular distributors?

Also: Do you have any plans to do something similar for a through-hole version of the 10 pin 1.27mm IDC sockets (http://au.mouser.com...kTNcJ8wnslDRg==)? Mouser has them but you have to buy 990 at once :-)

Depends how many you wanted, but i managed to get a few as free samples from samtec, so icould prototype some modules. You need to use the part builder on the site to build this code SHF-105-01-L-D-TH

Nak.

Sweet will have to get myself a few of those Nak.

Secret labs releasing a flux capacitor for hobbyists????

My understanding of AGENT is that it uses Bluetooth LE for all comms so i would imagine that you would need a Bluetooth LE module for the GO to have it directly interact with AGENT, that said once the network module is out you should be able to write an app for your smart phone connect to the GP via TCP/IP and then use your phone bluetooth transceiver to communicate with AGENT.

 

Nak.

Hi Chris!

I´ve got a big problem. I changed the firmwares of 2 of my Netduino, and I installed the 4.2 .Net Micro Framework(previously desinstalling the 4.2.0 RC3) and none of them work!! I deploy my program but the visual studio says: "The debugging target is not in an initialized state;rebooting........." But they get frozen at this moment and I don´t have any kind of rsponse....

Could you help me please, thank you.

Hi Gomore11

Here are a few things to try:

• Have you uninstalled all previous SDK's (both the secrent labs netduino SDK and the previous .net microframework SDK's) and installed the latest (QFE2) versions ?
• Have you set the target framework to 4.2 in your project properties?
• In visual studio try changing the target framework to 4.1, closing the project properties, then opening them back up and changing the target framework back to 4.2.

Nak.

Hmmmm, any chance you can could post the csproj file for this project, it sounds like the references are going haywire somehow... Also does deploying a simple app like blinky now work from a fresh project? Nak.

Hi Stefan.

I know the procedure but, this is not the problem, my program is configured in .NET MF 4.2, this is what is confusing me.

I have found that changing the target to 4.1 (or below) saving and closing the properties, then changing the target back to 4.2 has fixed that issue for me in the past.
I suspect that it forces a regeneration of the relevant sections in the *.csproj file so that correct references are loaded etc.

You can determine if the issue is with your project file by creating a new project targeting 4.2 and deploying blinky or something equally trivial, if it works then its your project file is at fault and the procedure above should fix it, if not then it would probably be the SDK's, so a full uninstall and reinstall should tidy everything up.

Nak.

No way. I have done everything that nakchack told, but nothing. A detail that I see after upgrading the Netduino is that when I power up, the blue Led lights on only a very short time(much more shorter than when it use to have 4.2.0.RC3). And then, when I deploy my program to it, the blue led doesn´t light on at any time...........

Could be a clue of what is happening?????

Hi Gomore

So no dice when trying to deploy a new project?

Have you tried reflashing the firmware?
Also could you post a screen shot of your installed Netmf SDK and Netduino SDK in Control Panel -> Programs and Features ?

Nak.

I think in bootloader mode mfdeploy asks if you want to erase firmware or deployment (or both as it uses checkboxs) Nak.