Join the club lolI so want one of these! I wish I had a garage!
Chris
- Netduino Forums
- → Michel Trahan's Content
Michel Trahan's Content
There have been 155 items by Michel Trahan (Search limited from 29-April 23)
#21728 My Netduino CNC Machine
Posted by Michel Trahan on 15 December 2011 - 04:50 PM in Project Showcase
#21745 My Netduino CNC Machine
Posted by Michel Trahan on 16 December 2011 - 01:04 AM in Project Showcase
I was learning AUTOCAD 2012 and switch to INVENTOR 2012, and doing what you need takes about 3 minutes ... you should look into it !I actually ended up writing a craplet to spit out some g code to do what I needed (drill a hole every .5 inches along the x and y axis in a 12"x12" board.
-dan
#12579 Driverless PC<->Netduino communication using USB
Posted by Michel Trahan on 28 April 2011 - 12:52 PM in Beta Firmware and Drivers
Great News everyone, Terry Massey found a new way to get out of this mess. FOLLOW THIS PROCEDURE TO THE LETTER :You can also erase your Netduino using the erase pad...and then redeploy the bootloader using Atmel SAM-BA and the firmware using MFDeploy...all using USB.
Prepare everything since time is of the essence.
1- Have your netduino with the mini usb connected to it but not to the computer (leave the usb connection near the ports)
2- Start MFDeploy.exe, select USB as the transport (the combobox will be empty, and that is ok)
3- Put the mouse over the "erase" button on MFDeploy.exe
Once you are ready do this :
1- Press and hold the push button on the netduino for the whole procedure (leave it pushed at all times)
2- Plug the USB to the computer
3- You should see the combobox in MFDeploy.exe contain your usb port
4- Press as fast as you can the "erase" button on MFDeploy.exe
5- You can now release the push button on the netduino
If it worked, you should get a message asking if you are sure you want to erase the software on the netduino. This will only delete de software, not the bootloader
You can now deploy some other application while waiting for you RS232 shield and try the HID again
THANKS TERRY !
#12542 Driverless PC<->Netduino communication using USB
Posted by Michel Trahan on 27 April 2011 - 09:33 PM in Beta Firmware and Drivers
#12547 Driverless PC<->Netduino communication using USB
Posted by Michel Trahan on 28 April 2011 - 02:10 AM in Beta Firmware and Drivers
Should I install v4.1.1 beta firmware even if I only have an ordinary netduino ?You can also erase your Netduino using the erase pad...and then redeploy the bootloader using Atmel SAM-BA and the firmware using MFDeploy...all using USB.
#11528 Driverless PC<->Netduino communication using USB
Posted by Michel Trahan on 31 March 2011 - 05:36 PM in Beta Firmware and Drivers
#11527 Quad.Net Quadrocopter for .NETMF
Posted by Michel Trahan on 31 March 2011 - 05:20 PM in Project Showcase
Where is the code ? How do we get access to it ? I like the plug and play framework philosophy and want to build a netduino quadcopter with kalman filters for stability ... I want to contribute too but you guys are way ahead of me ... I just started !
So how can I get the code ?
#12316 Netduino servo class
Posted by Michel Trahan on 21 April 2011 - 04:11 AM in Netduino 2 (and Netduino 1)
#12051 Easy multiplexing with the Netduino
Posted by Michel Trahan on 13 April 2011 - 03:23 AM in Project Showcase
Great Tool, THANKS FOR SHARING (Sorry about the caps but this is exciting to me !)The schematics are made with the free tool Fritzing. Should also be mentioned since the tool is a great help!
#12440 Netduino for beginners - Gentle introduction with basic electronic project
Posted by Michel Trahan on 23 April 2011 - 04:59 PM in Project Showcase
#12263 Netduino Plus home automation
Posted by Michel Trahan on 20 April 2011 - 12:45 AM in Project Showcase
Cool interface ! Thanks for posting the links !I purchased all GE lighting:
http://www.jascoproducts.com/z-wave/
ThinkEssentials showing my setup with 10 lights, furnace, and three door sensors.
#12278 Netduino Plus home automation
Posted by Michel Trahan on 20 April 2011 - 01:05 PM in Project Showcase
Points, points ? Where ? For what ? How many per compliment ? How many do I loose if I make a critic ? LOLMichel: now are you just saying that to win points?
I'd like to see how you define the space and rooms But the interface looks very intuitive ! Good job on that 90% !
#12624 HT1632 interface (alpha)
Posted by Michel Trahan on 28 April 2011 - 11:24 PM in Netduino 2 (and Netduino 1)
#12312 Parallax RFID Reader
Posted by Michel Trahan on 21 April 2011 - 03:43 AM in Project Showcase
#12989 Open Source uIP porting project
Posted by Michel Trahan on 09 May 2011 - 01:39 AM in General Discussion
#13236 Open Source uIP porting project
Posted by Michel Trahan on 13 May 2011 - 04:10 PM in General Discussion
#12950 Open Source uIP porting project
Posted by Michel Trahan on 08 May 2011 - 03:39 PM in General Discussion
#12978 Open Source uIP porting project
Posted by Michel Trahan on 09 May 2011 - 12:08 AM in General Discussion
I know, I was having mileage on it lol I have a good work load and still manage to play with the netduino I see myself more as an integrator anywayThat was a comment when you said: "I'll just let you figure it out so I can download the code"
And the main reason hanzibal would probably the lack of a netduino plus or an ethernet shield for my netduino ! I can look at the code that exist that we need to translate ... ok I'll check the link, you got me convinced but keep the keyboard for someone who wants it
#12124 TMP36 Temperature Sensor/SB Protoshield
Posted by Michel Trahan on 15 April 2011 - 02:31 PM in Netduino 2 (and Netduino 1)
#11498 .NET Gadgeteer availibility
Posted by Michel Trahan on 31 March 2011 - 02:13 AM in General Discussion
I'm anxious to play with it ! I'll keep a budget for that !there are some exciting tidbits in there that will be fun surprises.
#12768 .NET Gadgeteer availibility
Posted by Michel Trahan on 02 May 2011 - 10:18 PM in General Discussion
#12794 .NET Gadgeteer availibility
Posted by Michel Trahan on 03 May 2011 - 06:26 PM in General Discussion
#13470 VirtualBreadboard Emulator Support for Virtual Netduino
Posted by Michel Trahan on 20 May 2011 - 02:16 AM in Project Showcase
#12163 How to access hardware timers/counters?
Posted by Michel Trahan on 17 April 2011 - 05:26 AM in Netduino 2 (and Netduino 1)
And a tutorial on how to do that (documentation and sample code)perhaps what we need is a good way to launch native code routines off of timer interrupts?
I agree !It would be great if the three timer/counters in the Netduino ARM7 CPU were exposed ...
#13252 Quadcopter Early Flight
Posted by Michel Trahan on 13 May 2011 - 08:40 PM in Project Showcase
- Netduino Forums
- → Michel Trahan's Content
- Privacy Policy