Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.

cefa

Member Since 20 Aug 2012
Offline Last Active Sep 07 2012 09:51 PM
-----

Posts I've Made

In Topic: Visual studio express connection error

20 August 2012 - 11:54 PM

Hi cefa,


Try closing MFDeploy. Does the device now appear in Visual C# Express?

If you change deployment from USB to Serial and then back to USB, does that help?

Chris



Hi Chris
As i understand with netduino and pc software sometimes needs only a reboot ....
thanks

cefa

In Topic: Netduino Firmware v4.2.0

20 August 2012 - 07:28 PM

Hi cefa,

You're posting this in the Netduino (not Netduino Plus) thread... Can you press PING in MFDeploy and verify that you're running Netduino Plus firmware (with Ethernet support) and not the regular Netduino firmware by accident?

Chris


Hi Chris,
Sorry i vould apologise, You are rigth ....and i need to sleep more ;-)
now i re-done all with the rigth firmware and its all ok...also ethernet!
thanks

cefa

In Topic: Netduino Firmware v4.2.0

20 August 2012 - 04:47 PM

Hello I have followed all the procedure to reset,re-flash Neduino plus to the firmware 4.2.0.0, I have successful reading with MFdeploy , setted an hardware address (also the mac address) also i test a little program (led blink) BUT, the ethernet interface is not working, it stop working, but WAS working with the previous firmware There are no led blinking, only the led ACT flink one time when i poer up netduino, then stop what are your suggestions? what i have to do? thanks to everybody siza

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.