Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Visual studio express connection error


  • Please log in to reply
2 replies to this topic

#1 cefa

cefa

    New Member

  • Members
  • Pip
  • 4 posts
  • LocationVenice Italy

Posted 20 August 2012 - 08:36 PM

After installing the latest version of the firmware (version 4.2.0.0) and also the new framework (4.2), when i made a new project---properties---dotNET micro framework --->by setting the combo to USB deploy, in the device, nothing appear (should be "netduino_plus") Using MFdeply i have no error I try to erase and re-install .NET new framework, also the sdk and the temporary files on windos, but no success? somebody have already figth this situation? thanks cefa

#2 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 20 August 2012 - 09:48 PM

Hi cefa,

After installing the latest version of the firmware (version 4.2.0.0) and also the new framework (4.2),
when i made a new project---properties---dotNET micro framework --->by setting the combo to USB deploy, in the
device, nothing appear (should be "netduino_plus")
Using MFdeply i have no error
I try to erase and re-install .NET new framework, also the sdk and the temporary files on windos, but no success?
somebody have already figth this situation?

Try closing MFDeploy. Does the device now appear in Visual C# Express?

If you change deployment from USB to Serial and then back to USB, does that help?

Chris

#3 cefa

cefa

    New Member

  • Members
  • Pip
  • 4 posts
  • LocationVenice Italy

Posted 20 August 2012 - 11:54 PM

Hi cefa,


Try closing MFDeploy. Does the device now appear in Visual C# Express?

If you change deployment from USB to Serial and then back to USB, does that help?

Chris



Hi Chris
As i understand with netduino and pc software sometimes needs only a reboot ....
thanks

cefa




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.