Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.

caEstrada

Member Since 19 Jul 2012
Offline Last Active Sep 03 2014 01:10 AM
-----

Posts I've Made

In Topic: Netduino Plus 2 Firmware v4.3.1

20 June 2014 - 04:29 PM

Chris,

 

Already found the problem: BootLoader USB Driver was not updated, was installed but not updated on my computer.  I just click to update using the ST Microeletronics Directory under C:Applications and ready.

 

This new version do not work with VS2010 but VS2012...

 

Thanks for the great support and all the suggestions...


In Topic: Netduino Plus 2 Firmware v4.3.1

20 June 2014 - 03:49 PM

Thanks Chris, I will try that and I will let you know...thanks again


In Topic: Netduino Plus 2 Firmware v4.3.1

19 June 2014 - 09:31 PM

Chris,

 

I can see the board with MFDeploy.  The board is NOT in bootloader mode.  The USB drivers work very well.

 

I can remember Netduino Plus was upgraded using a procedure thru MFDeploy...can I use that procedure with new firmware files and this new board?


In Topic: Netduino Plus 2 Firmware v4.3.1

19 June 2014 - 09:01 PM

Chris,

 

Same result, installed and restarted windows7.  What am I doing wrong?

 

Ok, disconnect the board.  Press button and keep it pressed while connecting USB to computer.  Run NetduinoUpdate...but no activity, just the OS sound like we have a new board connected but not knowing what to do...

 

I have the REV A-....both, white and blue are ON, is bootloader mode, right?


In Topic: Netduino Plus 2 Firmware v4.3.1

19 June 2014 - 04:28 PM

Chris,

 

Thanks for addressing this.

 

Nothing shows up in MFDeploy and DFUSE.  When I connect the usb while pressing the button, the PC makes the typical sound that drivers are not installed for this board-mode and Win7 does not recognize the board (in bootloader mode).

 

However, when I connect usb in normal fashion, it works great (version 4.2 and VS2010), pretty stable, no issues.

 

Perhaps I used wrong link to get proper ST DFU tools...where are the latest.

 

Suggestions?

 

Thanks!!


home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.