Netduino home hardware projects downloads community

Jump to content

The Netduino forums have been replaced by new forums at This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.


Member Since 19 Apr 2014
Offline Last Active Dec 22 2014 09:15 PM

Posts I've Made

In Topic: New user: using VS2013 problems

22 December 2014 - 09:18 PM

Ok, so i flashed 4.2.2 using the instructions found here: http://forums.netdui...-v422-update-2/


Set project build settings to use 4.2, started building and deploying but....... same result.


hmm wait, i tried your MFDeploy ping suggestion... hmm that shows lots of errors... what should i do?



Connecting to NetduinoPlus2_Netduino...Connected
IP Address:
No debugger!
Create TS.
 Loading start at 806a988, end 8085288
Assembly: mscorlib (
Assembly: Microsoft.SPOT.Native (
Assembly: Microsoft.SPOT.Hardware (
Assembly: Microsoft.SPOT.Net (
Assembly: System (
Assembly: Microsoft.SPOT.Hardware.SerialPort (
Assembly: Microsoft.SPOT.IO (
Assembly: System.IO (
Assembly: Microsoft.SPOT.Hardware.PWM (
Assembly: Microsoft.SPOT.Hardware.Usb (
Assembly: SecretLabs.NETMF.Diagnostics (
Assembly: SecretLabs.NETMF.Hardware.Netduino (
Assembly: Microsoft.SPOT.Hardware.OneWire (
Assembly: Microsoft.SPOT.Time (
Loading Deployment Assemblies.
Attaching deployed file.
Assembly: MFConsoleApplication1 (
Attaching deployed file.
Assembly: SecretLabs.NETMF.Hardware.Netduino (
Attaching deployed file.
Assembly: SecretLabs.NETMF.Hardware.NetduinoPlus (
Link failure: some assembly references cannot be resolved!!
Assembly: SecretLabs.NETMF.Hardware.Netduino ( needs assembly 'Microsoft.SPOT.Hardware' (4.1.2821.0)
Assembly: SecretLabs.NETMF.Hardware.Netduino ( needs assembly 'mscorlib' (4.1.2821.0)
Assembly: SecretLabs.NETMF.Hardware.NetduinoPlus ( needs assembly 'Microsoft.SPOT.Hardware' (4.1.2821.0)
Assembly: SecretLabs.NETMF.Hardware.NetduinoPlus ( needs assembly 'mscorlib' (4.1.2821.0)
Error: a3000000

In Topic: New user: using VS2013 problems

03 December 2014 - 08:41 AM

I'm at work atm so try this tonight (my time; now it's 9:41 am). If i want to run 4.2 on my board, i need to flash it again, right? Like i said; i'm new at this.... so how do i do that. And, when done, do i need to install a previous version of visual studio or still able to use 2013?

In Topic: New user: using VS2013 problems

02 December 2014 - 08:24 PM

Pressing the pushbutton didn't help.


I'm running .NET Micro Framework V4.3 SDK-R2-Beta


I tried to re-install the sdk but no success...


But, apart from the debugging; should the app, because it's deployed successfully, run anyway and make the on-board led blink?

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.