Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Introducing Netduino Plus 2


  • Please log in to reply
195 replies to this topic

#181 thepilotfish

thepilotfish

    Member

  • Members
  • PipPip
  • 12 posts

Posted 30 March 2013 - 04:57 PM

Thanks Chris. So does it mean we should be able to read/write SDHC (32GB/FAT32) with 4.2.2.2? I did read through the release notes on CodePlex but didn't find a definitive answer.

 

 

 

 

Chris

www.projectpilotfish.com



#182 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 30 March 2013 - 06:59 PM

Thanks Chris. So does it mean we should be able to read/write SDHC (32GB/FAT32) with 4.2.2.2? I did read through the release notes on CodePlex but didn't find a definitive answer.

You may be able to, but we haven't integrated KodeDaemon's enhancements quite yet. Chris

#183 shobana

shobana

    Member

  • Members
  • PipPip
  • 15 posts

Posted 02 April 2013 - 08:46 AM

hello sir,
 Now i purchased new netduino plus 2 board iand i want to run the garage door open or close project using netduino plus 2 but m gettin the error cannot deploy mcorlib.dll assmebilies of program 4.1 into the netduino plus 2 version4.2 pls tel me the solution
 
 
in this link this project i want to do in netduino plus 2  http://androidcodemonkey.blogspot.in
 
pls tel the solution..



#184 JerseyTechGuy

JerseyTechGuy

    Advanced Member

  • Members
  • PipPipPip
  • 870 posts

Posted 02 April 2013 - 12:06 PM

hello sir,
 Now i purchased new netduino plus 2 board iand i want to run the garage door open or close project using netduino plus 2 but m gettin the error cannot deploy mcorlib.dll assmebilies of program 4.1 into the netduino plus 2 version4.2 pls tel me the solution
 
 
in this link this project i want to do in netduino plus 2  http://androidcodemonkey.blogspot.in
 
pls tel the solution..

You have to upgrade the project from version 4.1 to version 4.2
  • BMW likes this

#185 shobana

shobana

    Member

  • Members
  • PipPip
  • 15 posts

Posted 03 April 2013 - 10:37 AM

HOW TO DO UPGRADE THE PROJECT FROM 4.1 TO 4.2



#186 neslekkim

neslekkim

    Advanced Member

  • Members
  • PipPipPip
  • 350 posts
  • LocationOslo, Norway

Posted 03 April 2013 - 10:38 AM

Project properties..


--
Asbjrn


#187 shobana

shobana

    Member

  • Members
  • PipPip
  • 15 posts

Posted 03 April 2013 - 10:40 AM

im new to visual studio CAN U PLS DO THAT CHANGES IN THE CODE AND SEND ONE ATTACHMENT FILE LIKE .ZIP PLS

 

DIS IS MY MAIL ID shoby09@gmail.com



#188 neslekkim

neslekkim

    Advanced Member

  • Members
  • PipPipPip
  • 350 posts
  • LocationOslo, Norway

Posted 03 April 2013 - 10:45 AM

google it.. Or look at these pictures:

http://embedded-lab.com/blog/?p=6206


--
Asbjrn


#189 shobana

shobana

    Member

  • Members
  • PipPip
  • 15 posts

Posted 03 April 2013 - 10:57 AM

thank you so much for the post,

 

wat i understud in that link is itz for 4.1 softwares to be installed but what m asking is ,

 

i now purchased new ND+2 board in that what i did is VBc# --> new project --> vbc#--> netduino plus 2 ( i selected)--> i put the code program.cs and webservice.cs--> debugged --> i got the output generating an ip but if i put that ip into other webbrowser m getting oops page doesn't opens , may i know the reason, can u pls suggest me how to implement..

 

 

mean while how to upgrade  project v4.1 to 4.2

 

http://wiki.netduino...y-mscorlib.ashx

 

in this link i followed the 4th step in this but i din get good response for this project..



#190 shobana

shobana

    Member

  • Members
  • PipPip
  • 15 posts

Posted 03 April 2013 - 10:59 AM

thank you so much for the post,

wat i understud in that link is itz for 4.1 softwares to be installed but what m asking is ,

i now purchased new ND+2 board in that what i did is VBc# --> new project --> vbc#--> netduino plus 2 ( i selected)--> i put the code program.cs and webservice.cs--> debugged --> i got the output generating an ip but if i put that ip into other webbrowser m getting oops page doesn't opens , may i know the reason, can u pls suggest me how to implement..


mean while how to upgrade  project v4.1 to 4.2

 

 

http://wiki.netduino...y-mscorlib.ashx

 

 

in this link i followed the 4th step in this but i din get good response for this project..



#191 BMW

BMW

    New Member

  • Members
  • Pip
  • 2 posts

Posted 14 July 2013 - 06:28 AM

dear Chris Sir

 

i am happy that i started woking with Netduino plus 2 system

 

As i love .net c#

 

i  am really happy about program debug support

 

sir 

 

i am going thru your book getting started 

 

can u suggest any other book for project on netduino

 

thanks

 

BMW 



#192 EagleSparrow

EagleSparrow

    Advanced Member

  • Members
  • PipPipPip
  • 34 posts
  • LocationMiami, Florida

Posted 19 November 2014 - 08:28 PM

I have a question.

I purchased one based on this thread. I really need to get in to that ARM processor and code.

what are the projects, all Microsoft Micro Framework?

IS there a way to JTAG in and use a Linux distro and if so which one? I do not know how much Microsoft charges for distributing if at all.

 

Also how hard is it to duck tape a Wireless connection and or a GSM to it?

I want to send and get requests to this device through a web service. I am curious if I would have to do a REST implementation.

 

This is my first project with netduino board and eventually would have to fold all this into a product and use this as reference design. How hard is that guys and what resources could I use? I do not have a free CAD package to add in to this design what I need for merging other circuits or a layout tool that I could create the netlist for having this created for me. I also will need to manufacture in quantity.

 

Thanks

 

-Peter

 

 

 

 

 

 

 

 



#193 EagleSparrow

EagleSparrow

    Advanced Member

  • Members
  • PipPipPip
  • 34 posts
  • LocationMiami, Florida

Posted 19 November 2014 - 08:46 PM

I am interested in adding a GSM and/or a wireless module to this or integrate the circuits in to one design. Has anyone done this?

 

-Peter



#194 EagleSparrow

EagleSparrow

    Advanced Member

  • Members
  • PipPipPip
  • 34 posts
  • LocationMiami, Florida

Posted 01 December 2014 - 04:44 AM

My device is dead trying to move to 4.3.1, i may need to reflash the bootstrap and i am having lots of problems.
Can someone post links to everything to set this up from bare metal?

I need an app that can query a webpage and send secure post data back to the server based on what it got from my ashx or aspx pages.

Also any examples of this?
I need to talk blue tooth to this netduino plus 2. To send tell it What to do and get info through bluetooth. Any help or resources on or for this? I need this thing up and running asap.

Thanks guys!!!

#195 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 25 December 2014 - 06:15 PM

Hi EagleSparrow,

My device is dead trying to move to 4.3.1, i may need to reflash the bootstrap and i am having lots of problems.
Can someone post links to everything to set this up from bare metal?

Let's get you back up and running first... [Then take a look at the NETMF SocketClient and HTTP Client samples to start working with HTTP, etc.]

On reflashing: put your board in bootloader mode (by pressing the pushbutton while powering your board up via your computer's USB port). Then run NetduinoUpdate.exe (which comes with the firmware you're targeting) and reflash your board. This will automatically reflash the bootloader and firmware and erase the code deployment area simultaneously. After doing this, run MFDeploy and go to "target > configuration > network config" menu option and re-enter your board's MAC address. That should get you back to factory conditions.

Does that help get you pointed in the right direction?

Welcome to the Netduino community,

Chris

#196 EagleSparrow

EagleSparrow

    Advanced Member

  • Members
  • PipPipPip
  • 34 posts
  • LocationMiami, Florida

Posted 26 December 2014 - 07:54 PM

Hi EagleSparrow,

Let's get you back up and running first... [Then take a look at the NETMF SocketClient and HTTP Client samples to start working with HTTP, etc.]

On reflashing: put your board in bootloader mode (by pressing the pushbutton while powering your board up via your computer's USB port). Then run NetduinoUpdate.exe (which comes with the firmware you're targeting) and reflash your board. This will automatically reflash the bootloader and firmware and erase the code deployment area simultaneously. After doing this, run MFDeploy and go to "target > configuration > network config" menu option and re-enter your board's MAC address. That should get you back to factory conditions.

Does that help get you pointed in the right direction?

Welcome to the Netduino community,

Chris

 

 

Ok. I got it running. Now I have to add the socket code to it and try it. I

Thanks

-Peter






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.