i have been trying to write the program myself but i dont know were to even start. i am getting closer and closer to my deadline and have no accomplish nothing with it. i am willing to pay for this project to be done. if your interested please reply and i will post more of what i need. pay is negotiable. thanks
need help!
#1
Posted 28 March 2013 - 04:45 PM
#3
Posted 28 March 2013 - 06:31 PM
I will do it for...
Thanks for this.
Making my day even better
- optimus primer likes this
NeonMika.Webserver
> Control your N+ and write webservice methods easyily
> Receive data from you N+ (in XML or JSON)
> Browse the SD on your N+ directly in the browser and down - and upload files
If you need help with NeonMika.Webserver, please just leave a note in the thread and/or contact me via Skype
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Mistakes teach you important lessons. Every time you make one, you are one step closer to your goal. ----
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
#4
Posted 28 March 2013 - 07:31 PM
Probably not the best place to be asking for paid help. I am a paid consultant and do this type of work, but certainly would not think of taking on a task like this especially from this kind of forum post. This is an open community and everyone tries to help equally and learn equally. It sounds like you bit off a little more than you could chew on your project.
Perhaps if you post of some details of the project and what your struggles are, the community can help give you some guidance so you can finish the project that you chose to take on.
- Paul Newton and optimus primer like this
#5
Posted 28 March 2013 - 08:31 PM
Probably not the best place to be asking for paid help. I am a paid consultant and do this type of work, but certainly would not think of taking on a task like this especially from this kind of forum post. This is an open community and everyone tries to help equally and learn equally. It sounds like you bit off a little more than you could chew on your project.
Perhaps if you post of some details of the project and what your struggles are, the community can help give you some guidance so you can finish the project that you chose to take on.
thanks for the info. i have posted some what of the stuff i ineeded but didnt get any replies. the deadline is kinda getting close and there is no way possible i coud finish it. the task would be rather easy for someone with experience with programming which i am not. im taking a plc class this semester but nothing comes close to programming with c#.
could you possible point me in the right direction for someone or company that would write the program for pay?
i would perfer someone close to where i live. near nashville tn. but anyone would work.
thanks for all the help
#7
Posted 29 March 2013 - 07:33 AM
- JerseyTechGuy likes this
#8
Posted 29 March 2013 - 01:34 PM
Is this your custom security project?
http://forums.netdui...-up/#entry47422
So you bought a keypad that works with a Control Panel, which you want to replace with a netduino. Your keypad have two wire for communication with the Control Panel, sending commands and displaying received statuses. Right?
The problem here is where is the specifications of these 2 wire? Which protocol is used to send/receive commands?
It's fairly simple to program a state machine for your purpose, but without electrical and protocol information on this particular keypad, it's nearly impossible to help you.
#9
Posted 29 March 2013 - 02:33 PM
the keypad idea was trash.only information i can find was that the standyby mode 20ma and alarm mode was 55ma.
thinking it would have been easier just to use a 12 button keypad with an extra netduino.
i had recently set up a small sensor setup at my house with the help from this website on the programming part.
i work part time at a metal shop on the weekends designing parts for the company and i ran the idea by the owner to maybe put a security system in the building without having a monthly payment. he wants me to show him some kind of progress by next week. not got anywhere really. dont even know were to start. we set down and he told me kinda how he wants the system to work. i will post it below.
i know that some of the things i dont have specs on like the autodialer and a small buzzer or even the siren. but a small signal could be ran to these devices and i could use a small control relay to make them work.
i am in way over my head. so any help would be nice, thankss
key pad mode type
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users