The Netduino forums have been replaced by new forums at community.wildernesslabs.co.
This site has been preserved for archival purposes only
and the ability to make new accounts or posts has been turned off.
I am wondering what is in store for the Netduino Go. I was a raving fan of the product and still own one for future projects, however, I needed to get an aquarium controller off the ground while learning a lot about programming the devices.
I am wondering whats going to happen with the Netduino Go: Future Modules, Capabilities and Support.
I think it would be good to hear from Secret Labs on the subject. Please let us know officially what is going on.
This isn't an attempt to slander the company. I am just curious where the unit direction is going and product direction entirely.
Hey zemuss,
Along with contributors from the community, we're continuing to work on new features and firmware for Netduino Go. We have a few new modules queued up (i.e. hardware is already designed, parts in stock, assembled or ready to be assembled) so right now engineering is focused on getting firmware ready for those new modules.
Chris
We're shipping new features as they get finished and tested, new hardware as it gets assembled, etc. There are a lot of moving parts so I don't want to promise any dates quite yet...but there is more coming.
Chris
Anything going to be released this year at least? GO has so much potential, but it is languishing and the perception is that Secret Labs has abandoned it.
Of course, yes.
I wish that developing open source hardware, protocols, firmware, etc. was faster and on a bigger budget. In the meantime, we have engineering resources working on a few new things. Including a surprise or two.
Chris
I personally think that's not such a bad idea - Obviously you Secret Labs need to be commercial in what they do, and any contribution toward the engineering cost via a Kick starter or similar product might help give them the resources they need to justify the engineering costs?
At my employer we offer customers the opportunity to contribute toward development features, and if we get enough contribution to something we want to do anyway it gives us the priority we need!
Yes! I would certainly help fund the development of these projects to bring the go! back from what seems like the dead.
We also should realize that throwing money at the problem isnt always the solution. By all means, it helps, but If Secret Labs is working on other projects, things will move along at similar speeds.
I know that the go! hardware and software is open sourced, but what about the modules? If Secret Labs is laging behind on the design and development, LET US HELP!
There are people on these fourms who I think would love to contribute to the design of new modules. Some of them may even have the resources to build prototypes and report on progress.
The beauty of this, is:
1. Some load could be taken off of the Secret Labs team
2. Users who want these modules faster, can make it happen
3. Secret Labs still has the final go/no-go (see what I did there?) on each module if it is not up to the standards that they set
4. If a design is finalized, but not in production yet, we can build our own until an official module comes out.
If the hardware is to be open sourced later, why not start it that way?
At least thats my opinion, but what do others think. Please dont be afraid to say: "Adam, your wrong. Heres why..."
The source code for the module drivers (the NETMF code) released by SL can be found over in the Wiki. At the moment they SL have not released the source code for the modules themselves. You can always approach SL to see if they will release the source code for the modules themselves.
If you want some code and a tutorial on making a module based upon GoBus 1.0 protocol then head over here:
The source code for the module drivers (the NETMF code) released by SL can be found over in the Wiki. At the moment they SL have not released the source code for the modules themselves. You can always approach SL to see if they will release the source code for the modules themselves.
If you want some code and a tutorial on making a module based upon GoBus 1.0 protocol then head over here:
Hi Adam,
Just to be clear--GoBus is an open protocol, and anyone is welcome to build modules (or use GoBus for other purposes).
That said, we have several first-party modules in the works and we're also creating some firmware to help third-parties support GoBus 1.5 seamlessly. The v1.0 protocol itself is done and v1.5 is coming out of beta soon too.
What kinds of things would you like to help with, to grow the ecosystem faster? We really appreciate your enthusiasm and support.
Chris
At this point, I think I have the resources to begin to at least think about designing a module.
I don't think there is too much I can do personally to help, but in my opinion, the best way to grow this ecosystem is to finish the shield base and ethernet adapter totally. After that, its basically equal to the +2 and it can only go up from there.
I guess I'll carry on messing around with this kit, and maybe I can hack a few things together, but I think that this system has the potential to be absolutely amazing. There are still bugs to work out and hardware to finish, but I think as we see that happen, the community will grow around it, but its just slow right now.
Great job with what you have done so far, but the go! can't afford to (appear to) be on the back burner for much longer.