piwi's Content - Netduino Forums
   
Netduino home hardware projects downloads community

Jump to content

  2. → piwi's Content

The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.

piwi's Content

There have been 33 items by piwi (Search limited from 28-April 23)


By content type

See this member's


Sort by                Order  

#52454 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 29 August 2013 - 08:34 PM in Netduino Mini

Hi Baxter, welcome to the club.

 

I have got two CC3000 Boost both on patch 19. The one works pretty much constantly and can even handle UDP packets. The other one, as well on patch 19 gives me the creeps though. Sofar not succeeded in coming even close to the first one ?????? 

 

If I use the second on a TI Sellaris board it just connects and get's an IP address, wunderfull, unsecured but working. But when I exchange the first one with the second one and you would think, same setup, same patch, same power supply and same software, well nothing is more surprising then good old TI always open for a surprise...it just doesn't ....... work. Although this one is secured thru WPA/WPA2 etc.

CC3000 Web Server Example ApplicationSending - Simple Link StartSend 4000 startingSend 4000 startingSend 4000 startingSend 4000 startingSetting Connection Policy.Send 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingAttempting Connection to AK16-USSend 0001 startingSetting Event MaskSend 0008 startingRequesting SP VersionSend 0207 startingRequesting Buffer SizeSend 400B startingConfiguring DHCPSend 2001 starting

beats me ....



#52550 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 04 September 2013 - 06:58 PM in Netduino Mini

I just bought a new cc3000 chip with the new symbolization, but it had the old firmware.  So, I decided this weekend to start work on a C# based firmware flasher.  Nearly all the code is done, but it likely has bugs, but I am going to test extensively before I try anything on my guinea pig cc3000.  Also, I have added several key tests in the initialization to give useful errors when the communications are not working...  This will easily enable a remote update because the patch location can be anywhere.  

 

 

man .... this is so cool .... tell me, can you walk on water as well ....



#52847 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 20 September 2013 - 08:39 PM in Netduino Mini

Here is a video of some of the new features in action!

 

http://www.youtube.c...h?v=LjZbpr2qPqU

 

Just Awesome !! 

 

Any ATA of the software ?

 

Can the CC3000 be powered through a gadgeteer socket ?



#52872 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 24 September 2013 - 05:12 AM in Netduino Mini

Looks like a new service pack is available(V1.11.1),

http://processors.wi...atch_Programmer

http://processors.wi...#Version_1.11.1

It seems to be mostly network bug fixes.

 

@Baxter, thanks for the hint.



#52880 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 24 September 2013 - 06:59 PM in Netduino Mini

the patching worked ....

Example App:driver version 5.14.7.13MAC 08:00:28:01:6F:DBSP: 0.6.1.24

trying the software is again a complete different story ...

'Microsoft.SPOT.Debugger.CorDebug.dll' (Managed): Loaded 'C:UsersPeterCloudStationDevCerbuino4.3CC3KWifiExampleAppbinDebugleWifiExampleApp.exe', Symbols loaded.The thread '<No Name>' (0x2) has exited with code 0 (0x0).CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingSetting Event MaskSend 0008 startingSend 400B startingConfiguring DHCPSend 2001 starting

and there it waits forever ...



#52882 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 24 September 2013 - 07:30 PM in Netduino Mini

with a smart config via an iPad4 ...

Example App:driver version 5.14.7.13MAC 08:00:28:01:6F:DBSP: 0.6.1.2401Smart config DONEDONEIP:192.168.39.18

and look ma without any resistors ....

The thread '<No Name>' (0x2) has exited with code 0 (0x0).CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingResponse Received -- Simple Link Start ConfirmedSetting Event MaskSend 0008 startingResponse Received -- Event Mask confirmedRequesting SP VersionSend 0207 startingResponse Received -- SP Version is 0.6.1.24Requesting Buffer SizeSend 400B startingResponse Received -- Buffer Available: 6, Size: 1500Configuring DHCPSend 2001 starting

Direct wiring a CC3000 Boost to a cerbuino with 4.3 ... sorry but my n+ does not do 4.3 ....

 

why the DHCP does not work .... no clou but there is always something ...



#52883 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 24 September 2013 - 08:30 PM in Netduino Mini

and the next step ... DHCP works but still no connection to the network .... hmm ... I'll keep on trying ... 

CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingResponse Received -- Simple Link Start ConfirmedSetting Event MaskSend 0008 startingResponse Received -- Event Mask confirmedRequesting SP VersionSend 0207 startingResponse Received -- SP Version is 0.6.1.24Requesting Buffer SizeSend 400B startingResponse Received -- Buffer Available: 6, Size: 1500Configuring DHCPSend 2001 startingResponse Received -- DHCP Configured. The thread '<No Name>' (0x3) has exited with code 0 (0x0).Resetting Connection before setting Policy. Send 0002 startingConnection Disconnect.Setting Connection Policy.Send 0004 startingResponse Received -- Connection Policy SetAttempting Connection to AK16Send 0001 starting

this is done within a seconds notice ...



#52904 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 25 September 2013 - 09:29 AM in Netduino Mini

@Baxter, yep an update on codeplex might squeeze out some minor things that now and than cause some unexpected and surprising effects, until than I have to stick with what I've got and yes I patched the CC3000 boot with the stellaris and executed a smart config with it as well.

 

At the moment the cc3000 just does not connect to my secured AP, only unsecured will work ????

 

Any idea how I can get the secured one working ?

 

My idea, smart configuring the secured AP via stellaris and the iPad sending the beacon but no idea if this works. Can't do at the moment since I'm not there where the devices are .... I'll keep updating when I'll have the result though ...

 

Ha, you said you update the WRL-CC3000V2 succesfully. I've got a couple of those laying around ! That's good news, it worked. Can you let me know with what HW you got that working, a clear picture with the wiring would be nice.



#53729 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 29 October 2013 - 09:14 PM in Netduino Mini

Both, but mostly the CC3000. Do you have a link to the GHI forum topic in question?

 

try https://www.ghielect...h.wqs8ypHN.dpuf



#53972 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 11 November 2013 - 07:11 PM in Netduino Mini

or this one as well https://www.ghielect.../topic?id=13347



#55464 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 18 January 2014 - 04:57 PM in Netduino Mini

Hi Hanzibal,

 

glad to hear from you too !!

 

Greetings from a cold and dark Germany ....

 

I would be very interrested in the wifi thing you have. Any specs ??

 

Does it do ssl sockets and if so how many concurrently ??

Does it support AP mode ??

 

What chip are you using ??

 

Questions, question, questions ....

 

Hope to hear from you soon ...

 

BTW, the monster dac is still playing just fine ... although now controlled by jremote from an ipad via an pc/usb. Like to have that changed into some embedded solution ... but with those rates .... do not know if that will work ... time will tell ....

 

Keep the good things going ...

 

Cheers,

 

P.



#55517 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 20 January 2014 - 10:44 PM in Netduino Mini

Hi Hanzibal,

 

sorry no pics. Got the enclosures but did not get started yet ....

 

But, on the other hand, talking about embedded wifi solutions. The below adres goes to the smallest wifi package yet, 8x8 mm. There is even a starter kit. Just published on the CES show, as far as I know ...

 

http://www.econais.c...t-modules/ec19d



#58875 Windows on Devices? When?

Posted by piwi on 24 June 2014 - 02:43 PM in General Discussion

Hi All,

 

just registered on the windowsondevices web site, replied to their confirming email and some seconds later they replied again:

 

Quote: "Thank you for signing up for the Windows Developer Program for IoT.  We’ll let you know when your kit has shipped."

 

So appearantly something has changed ....

 

Cheers,

 

Me.



#58928 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 27 June 2014 - 09:06 AM in Netduino Mini

Hi Guys and especially Valkyrie-MT,

 

in case you haven't noticed it yet ....

 

There is some new stuff @ TI's concerning the CC3xxxx 

 

ti-pic_zps76a70599.jpg



#58959 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 30 June 2014 - 12:25 PM in Netduino Mini

.... maybe there will be an alternative (STM32F427, Wifi, 4.3) ....

 

.... interrested ? ....



#59076 DCC / Model Railroad

Posted by piwi on 07 July 2014 - 01:11 PM in General Discussion

there is another way of doing this, with a marklin modell train. You can use one of the .net microfamework harware boards to use the CAN bus signal, followed by some minor electronics for buffering (isolator and optocoupler). Have to dig up the schematics, pretty simple stuff. I did it on a breadboard. Then connect it to the second train controller box coming pretty much with every digital started pack and can be bought seperately as well.

 

Use some software in .net to write the CAN bus messages. And off you go, I succeeded in doing this even with an LCD touch connected to the NetMF HW and control the trains speed, extras, the train's track switches, pretty much anything connected and using the rails as means of communication. The CAN protocoll from Marklin can be found on the Marklin web site. 

 

One can even think of connecting a BLE or Wifi receiver unit to the .net board and be able to control your train from your mobile device. If you extend the controlling software with some nice UDP stuff UPNP is even in the game .... so your trainset will even be noticable on the network ....



#59505 Spark Core (TI CC3000) Porting for Super WiFI Mini?

Posted by piwi on 01 August 2014 - 03:05 PM in Netduino Mini

......

 

But, when I get the cc3100 tomorrow, I'll probably focus more on that. 

 

@Valkyrie-MT, you'll have to let the guys know this over here as well .... some very nice news ... a job well done 



#59624 High Resolution Quad Encoder Problem

Posted by piwi on 08 August 2014 - 10:02 PM in General Discussion

@spiked: if you still in for a go at FPGAs try this one https://github.com/h...ok.pdf?raw=true

@Juzzer: I seem to keep running into kiwis lately ....


#59835 .net MF on 32F429IDISCOVERY

Posted by piwi on 21 August 2014 - 06:30 PM in General Discussion

I have one laying around ... see how it works with .net ... should be not that difficult ... I'll share my experiences here as well ...



#59839 .net MF on 32F429IDISCOVERY

Posted by piwi on 21 August 2014 - 07:36 PM in General Discussion

well so far so good ....

 

20140821_212518_zpsc4f8c054.jpg



#59842 .net MF on 32F429IDISCOVERY

Posted by piwi on 21 August 2014 - 08:07 PM in General Discussion

blast the usb driver refuses to install because of missing digital signature

 

anyone ???



#59846 .net MF on 32F429IDISCOVERY

Posted by piwi on 21 August 2014 - 08:23 PM in General Discussion

 Got this now ??

 

USBDrivererror_zpsfa07d7fe.jpg



#59847 .net MF on 32F429IDISCOVERY

Posted by piwi on 21 August 2014 - 08:50 PM in General Discussion

thx 2 juzzer's tip got to switch off the digital signing ... the driver installed now and even recognized the device ...

 

but blooming vs2012 does not see it for deploying ... no usb recognized device as .netmf deployable devices at all ...

 

any ideas left ??? 

 

well thinking about it ... I'd might check if mfdeploy has somthing to say ... maybe just the bootloader is on not the rest ... give me a minute ... or so ...



#59848 .net MF on 32F429IDISCOVERY

Posted by piwi on 21 August 2014 - 10:10 PM in General Discussion

this is going not so well ...

 

using the st-link to open the hex files and program to flash ... 

 

1. Tinybooter.hex

2. er_flash.hex

3. er_congfig.hex

 

but stil no recognition and deploy in VS2012. 

 

doing only point 1 & 2 I get the following result in mfdeploy when doing device caps:

Pinging... HalSystemInfo.halVersion:               4.3.0.0
HalSystemInfo.halVendorInfo:            Copyright Oberon microsystems, Inc.
HalSystemInfo.oemCode:                  255
HalSystemInfo.modelCode:                0
HalSystemInfo.skuCode:                  65535
HalSystemInfo.moduleSerialNumber:       FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
HalSystemInfo.systemSerialNumber:       FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
ClrInfo.clrVersion:                     4.3.0.0
ClrInfo.clrVendorInfo:                  Copyright Oberon microsystems, Inc.
ClrInfo.targetFrameworkVersion:         4.3.0.0
SolutionReleaseInfo.solutionVersion:    4.3.0.0
SolutionReleaseInfo.solutionVendorInfo: STMicroelectronics
SoftwareVersion.BuildDate:              Sep 25 2013
SoftwareVersion.CompilerVersion:        410713
FloatingPoint:                          True
SourceLevelDebugging:                   True
ThreadCreateEx:                         True
LCD.Width:                              240
LCD.Height:                             320
LCD.BitsPerPixel:                       16
AppDomains:                             True
ExceptionFilters:                       True
IncrementalDeployment:                  True
SoftReboot:                             True
Profiling:                              False
ProfilingAllocations:                   False
ProfilingCalls:                         False
IsUnknown:                              False

but after doing nr 3. the green/red led stop flashing and all is beyond recognition, in mfdeploy as well as vs 

 

this behavior is the same when I turn off/disconnect the device from USB and reconnect. It is recognized by USB but won't do any in neither mfdeploy nor vs. 



#59849 .net MF on 32F429IDISCOVERY

Posted by piwi on 21 August 2014 - 11:44 PM in General Discussion

wooohaaa .... running ... don't ask me why ... probably when I power down the pc the next time it won't work .... this was an adventure ... I even managed to give the device a new usb name ... of course after that I had a breaking issue so I went back to the st-link utility and set the name bytes to hex 00 and the original usb name came up again. Back to VS, started deploying only to figure out you can not mixed netmf versions, so had to uninstall 4.3.1.0 and install 4.3.0.0 since the ST is on that and voila there we go it deployed and ran almost faster then I could blink but instead the LEDs did so we have a nice running a little blinky led and empty screen program on a not so stable disco board:

 

Blinky_zps6c15dec5.jpg




  1. Netduino Forums
  2. → piwi's Content
  3. Privacy Policy
home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.