While I was getting bored with my Go I came along this little bugger:
Anyone have experience with these running .net MF?
.net MF on 32F429IDISCOVERY
23 replies to this topic
Posted 21 August 2014 - 02:35 PM
Could you share what you guys have?
Posted 21 August 2014 - 06:30 PM
I have one laying around ... see how it works with .net ... should be not that difficult ... I'll share my experiences here as well ...
Posted 21 August 2014 - 08:07 PM
blast the usb driver refuses to install because of missing digital signature
Posted 21 August 2014 - 08:50 PM
thx 2 juzzer's tip got to switch off the digital signing ... the driver installed now and even recognized the device ...
but blooming vs2012 does not see it for deploying ... no usb recognized device as .netmf deployable devices at all ...
any ideas left ???
well thinking about it ... I'd might check if mfdeploy has somthing to say ... maybe just the bootloader is on not the rest ... give me a minute ... or so ...
Posted 21 August 2014 - 10:10 PM
this is going not so well ...
using the st-link to open the hex files and program to flash ...
but stil no recognition and deploy in VS2012.
doing only point 1 & 2 I get the following result in mfdeploy when doing device caps:
Pinging... HalSystemInfo.halVersion: 184.108.40.206 HalSystemInfo.halVendorInfo: Copyright Oberon microsystems, Inc. HalSystemInfo.oemCode: 255 HalSystemInfo.modelCode: 0 HalSystemInfo.skuCode: 65535 HalSystemInfo.moduleSerialNumber: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF HalSystemInfo.systemSerialNumber: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF ClrInfo.clrVersion: 220.127.116.11 ClrInfo.clrVendorInfo: Copyright Oberon microsystems, Inc. ClrInfo.targetFrameworkVersion: 18.104.22.168 SolutionReleaseInfo.solutionVersion: 22.214.171.124 SolutionReleaseInfo.solutionVendorInfo: STMicroelectronics SoftwareVersion.BuildDate: Sep 25 2013 SoftwareVersion.CompilerVersion: 410713 FloatingPoint: True SourceLevelDebugging: True ThreadCreateEx: True LCD.Width: 240 LCD.Height: 320 LCD.BitsPerPixel: 16 AppDomains: True ExceptionFilters: True IncrementalDeployment: True SoftReboot: True Profiling: False ProfilingAllocations: False ProfilingCalls: False IsUnknown: False
but after doing nr 3. the green/red led stop flashing and all is beyond recognition, in mfdeploy as well as vs
this behavior is the same when I turn off/disconnect the device from USB and reconnect. It is recognized by USB but won't do any in neither mfdeploy nor vs.
Posted 21 August 2014 - 11:44 PM
wooohaaa .... running ... don't ask me why ... probably when I power down the pc the next time it won't work .... this was an adventure ... I even managed to give the device a new usb name ... of course after that I had a breaking issue so I went back to the st-link utility and set the name bytes to hex 00 and the original usb name came up again. Back to VS, started deploying only to figure out you can not mixed netmf versions, so had to uninstall 126.96.36.199 and install 188.8.131.52 since the ST is on that and voila there we go it deployed and ran almost faster then I could blink but instead the LEDs did so we have a nice running a little blinky led and empty screen program on a not so stable disco board:
Posted 25 August 2014 - 02:40 PM
Edited by zeroaviation, 25 August 2014 - 02:40 PM.
Posted 25 August 2014 - 02:49 PM
if you mean the one from the ST web site .... Yes !!!
1:1 Unchanged and still on NetMF 184.108.40.206 ...
Posted 25 August 2014 - 02:52 PM
@Juzzer, are you using the STM32F429I Discovery board as well ?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
|This webpage is licensed under a Creative Commons Attribution-ShareAlike License.|