Hi Vikram,
Welcome to the Forums!
I am guessing this is the Easy Driver. Its always good to put a link in.
I looked at the Quickstart guide that uses an Arduino, looks like you have done something very similar (apart from the 3.3V mod).
(I was surprised to see the tutorial taking the 12V supply through the Arduino on to the motoro board - lots of current to burn out the tracks!)
Looking at the schematic, there are two solder bridge jumpers - one for the 5V/3.3V option "SJ2" and one to use an external supply "SJ1".
It is posible you got the wrong one? If so, the board is still expecting 5V.
It might be worth using a shorter sleep in the loop in case the board is micro stepping and it is moving very slowly.
Sorry this is not much help - Paul
Hi Paul,
Thanks for the response. The board you linked on sparkfun is the one I'm using. The SJ2 is actually labeled 3/5v so I think I soldered the right one.
Thanks,
Vikram