How do you guys go from prototype to a full product? What are the steps involved? Anyone been through this journey already?
- Netduino Forums
- → YvesGoeleven's Content
YvesGoeleven's Content
There have been 17 items by YvesGoeleven (Search limited from 06-June 23)
#56582 What does it take to 'go to production'
Posted by YvesGoeleven on 02 March 2014 - 09:08 PM in General Discussion
#56603 What does it take to 'go to production'
Posted by YvesGoeleven on 03 March 2014 - 08:00 AM in General Discussion
Yes please!
#54812 Unzip library for NetMF
Posted by YvesGoeleven on 21 December 2013 - 03:19 PM in Visual Studio
Hi all,
Anyone knows if there exists an unzip library that works on netmf?
Thanks,
Yves
#56750 RN42 unable to send data
Posted by YvesGoeleven on 11 March 2014 - 07:09 AM in Netduino Plus 2 (and Netduino Plus 1)
After lot's of time wasted, I noticed the problem. I had the wrong baudrate set, so the data sent as gibberish #doh
#56712 RN42 unable to send data
Posted by YvesGoeleven on 08 March 2014 - 07:48 PM in Netduino Plus 2 (and Netduino Plus 1)
Hi,
I'm trying to setup a bluetooth connection between my Windows Phone and a netduino plus 2 using a RN-42 bluetooth chip (Sparkfun mate silver board).
I have been able to pair the devices as well as send data from the phone to the RN-42. But I'm unable to send data back, from the RN-42 to the phone.
How do I diagnose what is wrong?
#58993 New meetup in Brussels
Posted by YvesGoeleven on 03 July 2014 - 05:55 PM in General Discussion
Hi all,
Just wanted to let you know that I'm starting a new meetup in the area of Brussels, our first meeting will most likely happen on July 17th at the Microsoft offices in Zaventem.
Bring your netduino's, and let's build stuff together.
If interested (and in the neighbourhood), subscribe to our meetup group
www.meetup.com/Microsoft-oriented-IoT-Meetup/
Kind regards,
Yves
#56245 Netduino Plus 2 freezes
Posted by YvesGoeleven on 21 February 2014 - 08:24 AM in Netduino Plus 2 (and Netduino Plus 1)
Hi,
I'm having an issue with my Netduino Plus 2. After quite some time (more than an hour - several hours), it seems to freeze. It stops writing to Debug.Print, but when I place a breakpoint in VS at that moment it kicks back into action again. (VS is attached all the time)
Any ideas where to get started?
PS: My runtime is 4.3.0.0 Beta1 and using VS 2013
#56277 Netduino Plus 2 freezes
Posted by YvesGoeleven on 22 February 2014 - 03:21 PM in Netduino Plus 2 (and Netduino Plus 1)
I'm still trying to figure that out, my app does stop sending to the network as well after a while, but it's not necessarily related to the debug 'freeze' I'm seeing, I have the feeling that is a separate concern, related to debugging itself.
#56583 Netduino & RF transmitter to pair with and control smart electricity socket
Posted by YvesGoeleven on 02 March 2014 - 09:16 PM in Project Showcase
Not sure if it qualifies as a 'project', but I played around using my Netduino Plus 2 to turn on/off a lamp using an RF transmitter and a smart socket
I bought the following Kit: http://iprototype.be...first-rf434-kit, which consists of a 434Mhz RF transmitter and DIO smart sockets, and ported the arduino code for the protocol of DIO to netduino.
If I got it right this protocol should be similar or equal for multiple vendors including DIO, KAKU & Home-Easy as they all use the same hardware (signal length may vary though)
The source code for the protocol is available on github
Enjoy turning on/off your lamps or other stuff at home
#56682 Netduino & RF transmitter to pair with and control smart electricity socket
Posted by YvesGoeleven on 06 March 2014 - 08:23 PM in Project Showcase
Yes, that crossed my mind
But I won't be using a webserver, from a security & manageability point of view I don't want anyone to call into my devices. Instead I want them to call out, to an internet hosted (and well known) servicebus. Trusted apps can than send messages to that isecured endpoint.
PS: I will be releasing that bus to the public in a few days or weeks as well...
#56701 Netduino & RF transmitter to pair with and control smart electricity socket
Posted by YvesGoeleven on 07 March 2014 - 08:49 PM in Project Showcase
I'm monitoring my chilli seedlings remotely, the netduino is monitoring soil temp and sending the temp info to my phone (remotely). Now I'm adding capability to remotely turn on the illuminescent light. (I don't have a cat).
It's good feedback though that you guys are hesitant to hook devices up to the internet. I'm pretty confident it's safe for telemetry information, maybe commands that change your devices' state may be a bit different, I guess it depends on what you want to turn on/off.
#56728 Launching a message processing service for the internet of things
Posted by YvesGoeleven on 09 March 2014 - 07:56 PM in General Discussion
Hi all,
I wanted to let you know that I've launched a preview of messagehandler.net, which is a message processing service specifically designed for the internet of things.
Check it out, I hope you'll like it.
#57212 Launching a message processing service for the internet of things
Posted by YvesGoeleven on 29 March 2014 - 07:08 PM in General Discussion
There is a free environment to run experiments in, no worries.
But I left it out of the pricing page on purpose. I needed to know if people would actually sign up for the service even if they had to pay for it.
There is no point in just giving something away if you don't know you can ever turn it into something sustainable.
#53141 Connectivity
Posted by YvesGoeleven on 11 October 2013 - 05:45 PM in Netduino Go
Hi,
Last week I bought a netduino go starter kit and got up and running with it pretty quickly. But now I would like my ngo to communicate with the outside world, but there seems to be no simple options to do so. (No ethernet, wifi, usb to pc or anything...)
What are my options?
#53227 Connectivity
Posted by YvesGoeleven on 16 October 2013 - 04:38 PM in Netduino Go
Chris,
I got my cable today (TTL-232R-3V3-WE), but I'm not succeeding in sending data over the wire. Can you help me verify if I'm doing everything correct?
According to the datasheet, http://www.ftdichip....232R_CABLES.pdf, GND is black, TX is Orange and RX is yellow. So I've hooked up Orange to D0 and Yellow to D1 of the ShieldBase
As for code:
In my netduino project I do the following:
#53228 Connectivity
Posted by YvesGoeleven on 16 October 2013 - 05:34 PM in Netduino Go
Found it!
It should have been : serialPort = new SerialPort(shieldbase.SerialPorts.COM1, 9600, Parity.None, 8, StopBits.One);
#53144 Connectivity
Posted by YvesGoeleven on 11 October 2013 - 06:48 PM in Netduino Go
Thanks!
As I'm very new to this a few additional questions (so that I don't do anything stupid)
I assume this cable is the correct one? 3.3V with SIL connector to put on the analog IN?
http://be.mouser.com...y3R5sMdbLgwj41z
Can I still hook up a breadboard to the same shieldbase in this case, or will I need another one for that purpose?
- Netduino Forums
- → YvesGoeleven's Content
- Privacy Policy