Terry Fogg

Hi, From my previous post I have had problems deploying the ALPHA versions. I have now ALPHA 7 working with the following method. I deployed the ALPHA7 version and the deploy process hung at "Executing application" dialog box. I pulled the usb from the netduino, reconnected and use device capabilites to confirm that the firmware was loaded. I then used the erase managed application from MFDEPLOY, it erased some sectors, the rebooted successfully. It now works using VS2010 okay Terry

After deploying the new image, using mfdeploy it stopped with a dialog box at the end with executing application... I pulled the usb plug, and plugged it back in and enquired for the device capabilities,which indicated that the deploy may have worked based on the update HAL version. I then used the board with VS2010, simple loop with led flash. VS2010 deployed assemblies, but gets stuck at "Rebooting..." Managed to reset the board during the debugging,and somehow managed to get a breakpoint hit and could step the system,so code looks like its getting into the device. Cannot proceed any further at the moment with this system without a fix. I have code written for the Nokia 6100 display(Sparkfun) and require the variable bit SPI to try to get it working. Terry

Thanks for the information. Terry