Netduino home hardware projects downloads community

Jump to content

The Netduino forums have been replaced by new forums at This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.


Member Since 07 May 2012
Offline Last Active Sep 18 2015 12:12 AM

#61619 Another custom PCB based on Netduino Plus 2

Posted by Pablo on 15 February 2015 - 02:12 PM

As Cuno says, in the case of this board, the function is only gateway. The idea is to work on the development of different devices with I / O, and communicate using RF with the gateway. In this there is nothing new.
We decided not to use Zigbee or Zwave, because I think it is not ideal for IoT.
We are thinking of adding a esp8266 module for wifi, but to complement ethernet. Not to replace it.
Bottom side of the pcb does not have any component.
The cost of the components should be below the u$s 100.
For most devices that have no connection to the cloud directly, we are using PIC. I suppose it could be done also with MF but there are some factors, such as size and power consumption among others, and then we decided to use PIC.

#61611 Another custom PCB based on Netduino Plus 2

Posted by Pablo on 14 February 2015 - 10:51 PM

I want to share with you our Netduino Plus 2 project based. It is a PCB with some changes from the schematic, such as the RJ-45 connector with magnets, the array of resistance for common resistance and regulators.
This PCB also has integrated on board the following devices, GPRS module SIM908, accelerometer, and a pair of RF transceivers.
The function of this board is as a gateway between the RF network and the cloud, connected to an MQTT broker.
At the moment we are working on porting the libraries from Arduino.
We hope to make a very low scale production for the coming months.
Something that I find very necessary is a watchdog. Until now the idea is to add an external circuit.
I am very happy with the news of the new stack TCPIP and hoping to test as soon as possible.
Regards, Pablo

Attached Files

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.