- Netduino Forums
- → Viewing Profile: Posts: ddoodm
The Netduino forums have been replaced by new forums at community.wildernesslabs.co.
This site has been preserved for archival purposes only
and the ability to make new accounts or posts has been turned off.
Community Stats
- Group Members
- Active Posts 8
- Profile Views 5342
- Member Title New Member
- Age 29 years old
- Birthday August 2, 1994
-
Gender
Male
-
Location
Sydney, Australia.
-
Interests
Computers & technology.
0
Neutral
User Tools
Friends
ddoodm hasn't added any friends yet.
Posts I've Made
In Topic: Netduino and Ping))) Ultrasonic Sensor?
23 August 2010 - 10:45 AM
Hey guys!
Sorry for the really late reply. Unfortunately, I'm having problems with CW2's code. The LED on the Ping Ultrasonic Sensor just stays green, and after placing a few breakpoints, it never reaches the interrupt function. I think you need to send 'true' or 'on' to the Ping for 5 microseconds before reading values from it. But I can't find any way to delay in microseconds.
Thanks for your help again if possible!
In Topic: Digital Pins Never Off.
22 August 2010 - 06:43 AM
I did a few tests today. For some reason the relay works if I power it with 3.3v instead of 5v. So it's all good now. Thanks for the help guys!
In Topic: Digital Pins Never Off.
21 August 2010 - 12:35 PM
Thanks for the suggestion, but other components don't seem to be the problem.Have you tested it just with a volt meter with nothing connected?
I isolated the Netduino from everything and tested it with a volt meter. Everything looks perfect. Identical to the Arduino (Apart from the Arduino giving out 4.97v, while the Netduino only gave 3.3v). However, when I tried my relay module on both the Arduino and Netduino (both isolated from everything), it worked 100% on the Arduino, but still not the Netduino. This ain't making sense at all... I have to wait 'til the morning to get some LEDs. I can't seem to find one anywhere.
I think I'll record a video when I pick up that LED tomorrow. Not exactly sure what to take a photo of now I think about it.A picture could be very helpful.
Thanks again for the help! Really appreciate it.
In Topic: Digital Pins Never Off.
21 August 2010 - 10:02 AM
Are you using an external power supply? If so, are you sure all the gounds are connected?
I've tried it with both an external 12v supply, and just the USB cable. Neither work. I can upload a picture if you'd like.
In Topic: Netduino and Ping))) Ultrasonic Sensor?
19 August 2010 - 07:55 AM
The following code can be used to measure pulse width.
Thanks so much for that CW2! Really appreciate the code.
- Netduino Forums
- → Viewing Profile: Posts: ddoodm
- Privacy Policy