woof_woof_bark_bark

haha forgot the link:  http://blog.codeblac...d-with-I2C.aspx

This link also helped me a lot in moving forward with writing my own programs in I2C for my internship. 

If your'e ever looking to develop your own library or driver, I couldn't find a better source to get started with.

I had a feeling that it wouldn't be possible. Thanks so much for the help!

Good luck and good thoughts,

woof_woof_bark_bark

Worked like a charm thank you!

Thanks for the reply, I don't know what I did between my multiple attempts to get the board working, but suddenly after plugging it one of the many times it just worked and now I got the firmware updated to 4.3.1.

Being new to this board, I do have one question. I'm working on this project that seems to be wrong, and after trying to put it on my board I found that when I went back to trying to but previously working programs on my board I get the error "An error has occurred. Please check your hardware." While reading the forums I thought the way to fix this would be to plug/unplug the netduino and then erase using MFDeploy. However, when I click erase after all this, nothing shows up that can be erased.

The only solution I've found to get the board working again is to reinstall the firmware, and I don't think that I should have to be doing that. Any Ideas what might be going on or what I might be doing wrong (besides writing a code that doesn't work)?