Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.

FourT2

Member Since 28 Jul 2014
Offline Last Active Jul 14 2016 04:57 AM
-----

Topics I've Started

Netduino Projects on Hackster

26 December 2015 - 09:37 AM

Is anyone on this forum also a member of Hackster.io? I did not see any Netduino projects published, and there was no Netduino platform / channel, so I requested to create one: https://www.hackster.io/netduino

 

 

The community has a lot of great info on other platforms (Arduino, Galileo, Raspberry Pi, etc..) that we can learn from and leverage in our Netduino projects. 

 

Get your projects published / tagged! 


Updated Mini to 4.2, unable to connect or deploy projects

28 November 2015 - 07:14 AM

I was able to connect my Mini using Keyspan 19HS USB to RS232 adapter using the following configuration:

RX to ND pin1, TX to ND pin2, GND to ND pin 4, 5V to ND pin 12, and GND to ND pin 13.

 

Updated bootloader and flashed to 4.2 using SAM-BA 2.12.

 

But I am not able to connect to mini via PuTTY. It just sits at the blank screen and does not respond to Esc key.

(115200, 8 data bits, 1 stop bits, no parity, no flow control) 

 

Trying to deploy using VS 2015 shows this error: 

Opening port \\.\COM3
Port \\.\COM3 not found!
 
I've restarted the device a few times, and get same results.

 

MFDeploy can connect to device using Serial and shows device capabilities and device info:

 

HalSystemInfo.halVersion:               4.2.0.0
HalSystemInfo.halVendorInfo:            Netduino Mini (v4.2.0.1) by Secret Labs LLC
HalSystemInfo.oemCode:                  34
HalSystemInfo.modelCode:                177
HalSystemInfo.skuCode:                  4098
HalSystemInfo.moduleSerialNumber:       00000000000000000000000000000000
HalSystemInfo.systemSerialNumber:       0000000000000000
ClrInfo.clrVersion:                     4.2.0.0
ClrInfo.clrVendorInfo:                  Netduino Mini (v4.2.0.1) by Secret Labs LLC
ClrInfo.targetFrameworkVersion:         4.2.0.0
SolutionReleaseInfo.solutionVersion:    4.2.0.0
SolutionReleaseInfo.solutionVendorInfo: Netduino Mini (v4.2.0.1) by Secret Labs LLC
SoftwareVersion.BuildDate:              Sep 19 2012
SoftwareVersion.CompilerVersion:        410894
FloatingPoint:                          True
SourceLevelDebugging:                   True
ThreadCreateEx:                         True
LCD.Width:                              0
LCD.Height:                             0
LCD.BitsPerPixel:                       0
AppDomains:                             True
ExceptionFilters:                       True
IncrementalDeployment:                  True
SoftReboot:                             True
Profiling:                              False
ProfilingAllocations:                   False
ProfilingCalls:                         False
IsUnknown:                              False
DeviceInfo:
  HAL build info: 4.2.0.0, Netduino Mini (v4.2.0.1) by Secret Labs LLC
  OEM Product codes (vendor, model, SKU): 34, 177, 4098
  Serial Numbers (module, system):
    00000000000000000000000000000000
    0000000000000000
  Solution Build Info: 4.2.0.0, Netduino Mini (v4.2.0.1) by Secret Labs LLC
  AppDomains:
    default, id=1
  Assemblies:
    mscorlib,4.2.0.0
    Microsoft.SPOT.Native,4.2.0.0
    Microsoft.SPOT.Hardware,4.2.0.0
    Microsoft.SPOT.Hardware.SerialPort,4.2.0.0
    Microsoft.SPOT.IO,4.2.0.0
    System.IO,4.2.0.0
    Microsoft.SPOT.Hardware.PWM,4.2.0.1
    SecretLabs.NETMF.Diagnostics,4.2.0.0
    SecretLabs.NETMF.IO,4.2.0.0
 

 

I feel that I am getting close but not sure what else I am missing :-). Any ideas on how to proceed from this point?


home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.