Sulzi

Dear All,

 

I have just purchased 10 Minis for a new project. I have flashed them to 4.2.0.1. Is it true that the reset pin is not working in 4.2.0.1? I don't have the option to reset the mini with the gold pad every time it hangs and refuses to deploy via VS (that happens sometimes). The mini is part of a complex assembly where the gold pad is simply not accessible. What should I do? Is the only option to revert back to 4.1?

 

Thanks for any suggestions!!

Dear All,
I have completed several projects with the mini and the netduino plus. I am now tackling a project with 8-9 minis and a PC. The minis need to report data to the PC. I would like to connect the minis by means of a bus like i2c, spi, can, or similar (minimal wiring). The amount of data transmitted is small (few bytes); the frequency is only 2Hz. The distance between devices is about 1 ft (30 cm). The environment is somewhat noisy (electric motors are 2 feet away).
Which bus is most suitable for bi-directional communication among minis.
Thanks for your suggestions!

Love my Netduinos and the new 4.3.1 with VS2012!
I am developing an app with a com port,several digital and analog inputs and with two DS18B20 temp sensors that are connected via OneWire. The app works, communications work but I have a weird issue with OneWire. I can read temperatures from the sensors by addressing them directly. When I use OneWire.FindAllDevices to query for devices, then all hell brakes out. The call itself works and returns the serial numbers of the sensors. after the call has been completed, my serial port stops working and I always have to reboot to redeploy. I have seen another post in the forum where 'FindAllDevices' seems to cause trouble. Anyone with similar experience? Any help is appreciated!