- Netduino Forums
- → Viewing Profile: Posts: A.Ward
The Netduino forums have been replaced by new forums at community.wildernesslabs.co.
This site has been preserved for archival purposes only
and the ability to make new accounts or posts has been turned off.
Community Stats
- Group Members
- Active Posts 5
- Profile Views 5798
- Member Title New Member
- Age Age Unknown
- Birthday Birthday Unknown
-
Gender
Not Telling
0
Neutral
User Tools
Friends
A.Ward hasn't added any friends yet.
Posts I've Made
In Topic: Issue connecting via Ethernet
21 November 2011 - 01:25 AM
Nevermind. I figured it out. Quit embarrassing that I didn't catch this before I even started posting, but one of the digits on the gateway address had been changed at some point:( I changed it to the correct IP and everything works great now.
Time to have some fun!!!
In Topic: Issue connecting via Ethernet
21 November 2011 - 01:06 AM
Hi Chris,
I've ran several captures but the netduino never shows up in the list.
Here is the full exception message:
new message: voltage,2.33
time: 01/01/2009 00:09:44
memory available: 20304
#### Exception System.Net.Sockets.SocketException - CLR_E_FAIL (1) ####
#### Message:
#### Microsoft.SPOT.Net.SocketNative::getaddrinfo [IP: 0000] ####
#### System.Net.Dns::GetHostEntry [IP: 0008] ####
#### System.Net.HttpWebRequest::EstablishConnection [IP: 00e1] ####
#### System.Net.HttpWebRequest::SubmitRequest [IP: 0013] ####
#### System.Net.HttpWebRequest::GetRequestStream [IP: 0008] ####
#### Gsiot.PachubeClient.PachubeClient::CreateRequest [IP: 003e] ####
#### Gsiot.PachubeClient.PachubeClient::Send [IP: 0025] ####
#### HelloPachube.Program::Main [IP: 0065] ####
#### SocketException ErrorCode = 10060
#### Exception System.Net.WebException - 0x00000000 (1) ####
#### Message: host not available
#### System.Net.HttpWebRequest::EstablishConnection [IP: 00f1] ####
#### System.Net.HttpWebRequest::SubmitRequest [IP: 0013] ####
#### System.Net.HttpWebRequest::GetRequestStream [IP: 0008] ####
#### Gsiot.PachubeClient.PachubeClient::CreateRequest [IP: 003e] ####
#### Gsiot.PachubeClient.PachubeClient::Send [IP: 0025] ####
#### HelloPachube.Program::Main [IP: 0065] ####
System.Net.WebException: host not available
sleep for 1887 ms
new message: voltage,0.13
time: 01/01/2009 00:10:16
memory available: 20304
EDIT: When I unplug the netduino from my router and plug it into a different port I get this:
DM9161_AutoNegotiate
Valid PHY Found: 31
PHY: Vendor Number Model = 0xA
PHY: Model Revision Number = 0x0
AutoNegotiate complete
EDIT2: If you saw this second edit, nevermind. That was my wife's phone:-)
EDIT3: It doesn't appear that my router is seeing the netduino when I plug it in. I went into my DHCP client table in my router and I see everything on my network except for the netduino
I've ran several captures but the netduino never shows up in the list.
Here is the full exception message:
new message: voltage,2.33
time: 01/01/2009 00:09:44
memory available: 20304
#### Exception System.Net.Sockets.SocketException - CLR_E_FAIL (1) ####
#### Message:
#### Microsoft.SPOT.Net.SocketNative::getaddrinfo [IP: 0000] ####
#### System.Net.Dns::GetHostEntry [IP: 0008] ####
#### System.Net.HttpWebRequest::EstablishConnection [IP: 00e1] ####
#### System.Net.HttpWebRequest::SubmitRequest [IP: 0013] ####
#### System.Net.HttpWebRequest::GetRequestStream [IP: 0008] ####
#### Gsiot.PachubeClient.PachubeClient::CreateRequest [IP: 003e] ####
#### Gsiot.PachubeClient.PachubeClient::Send [IP: 0025] ####
#### HelloPachube.Program::Main [IP: 0065] ####
#### SocketException ErrorCode = 10060
#### Exception System.Net.WebException - 0x00000000 (1) ####
#### Message: host not available
#### System.Net.HttpWebRequest::EstablishConnection [IP: 00f1] ####
#### System.Net.HttpWebRequest::SubmitRequest [IP: 0013] ####
#### System.Net.HttpWebRequest::GetRequestStream [IP: 0008] ####
#### Gsiot.PachubeClient.PachubeClient::CreateRequest [IP: 003e] ####
#### Gsiot.PachubeClient.PachubeClient::Send [IP: 0025] ####
#### HelloPachube.Program::Main [IP: 0065] ####
System.Net.WebException: host not available
sleep for 1887 ms
new message: voltage,0.13
time: 01/01/2009 00:10:16
memory available: 20304
EDIT: When I unplug the netduino from my router and plug it into a different port I get this:
DM9161_AutoNegotiate
Valid PHY Found: 31
PHY: Vendor Number Model = 0xA
PHY: Model Revision Number = 0x0
AutoNegotiate complete
EDIT2: If you saw this second edit, nevermind. That was my wife's phone:-)
EDIT3: It doesn't appear that my router is seeing the netduino when I plug it in. I went into my DHCP client table in my router and I see everything on my network except for the netduino
In Topic: Issue connecting via Ethernet
16 November 2011 - 12:43 AM
Hi Chris,
I was running DHCP. I just tried a static IP but it didn't seem to make any difference.
I just installed Wireshark. I haven't used anything like it before and I'm not heavy on networking so it'll going to take me a bit to learn about it.
In Topic: Issue connecting via Ethernet
14 November 2011 - 11:44 PM
Thanks for the quick reply Chris! BTW, this is Alex from TR:)
I'm currently running MF 4.1.
- Netduino Forums
- → Viewing Profile: Posts: A.Ward
- Privacy Policy