How to reflash the "Beta" versions of the Netduino Plus
#1
Posted 22 May 2011 - 08:16 PM
Today LED's, tomorrow, the world!!! Well, OK, maybe servos.
#2
Posted 23 May 2011 - 06:09 AM
I have a Rev A board and the pad is still by the D0 pin - although it's silver and not gold. It is the small pad to the far right just under the white box surrounding the zero.However, I can't seem to find the ERASE pad that everyone talks about.
I found it easily on my original Netduino, but there is no gold ERASE pad below D0 on the nd+.
Hope this helps,
Mark
To be or not to be = 0xFF
Blogging about Netduino, .NET, STM8S and STM32 and generally waffling on about life
Follow @nevynuk on Twitter
#3
Posted 23 May 2011 - 11:31 AM
I have a Rev A board and the pad is still by the D0 pin - although it's silver and not gold. It is the small pad to the far right just under the white box surrounding the zero.
Hope this helps,
Mark
Yes, thanks! I thought that might be it, but was a little hesitant to go throwing some voltage around willy-nilly.
Thanks again!
Today LED's, tomorrow, the world!!! Well, OK, maybe servos.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users