4D Systems Lib, update/fix/port of the Lumensoft
Started by Troll feeder, Apr 13 2011 07:30 AM
5 replies to this topic
#1
Posted 13 April 2011 - 07:30 AM
#2
Posted 18 April 2011 - 02:32 PM
Here it is Whole project in a zip file.
http://www.youtube.com/embed/r8uNXmeRgoQ
Look at the tricorder project for some updated footage.
#3
Posted 18 August 2011 - 08:10 PM
I can't seem to get this project to work. Does it only work with certain 4D LCD's? I never get any response from the LCD.
I am using the uLCD-32PT. Is there a firmware update required?
Thanks,
Dan
#4
Posted 18 August 2011 - 09:30 PM
it works fine on all (1.44, 1.8,3.2 )i've tried. You have to use the scg firmware from the 4DSystems site, and make sure the proper libs are included I think I had them and used an ifdef to choose them.
#5
Posted 19 August 2011 - 12:51 AM
I finally managed to get it working but the only way was to remove this section;
//SendData(0x51, 0x0D);
//UART.Close();
//UART.BaudRate = 115200;
//UART.Open();
//CheckResponce();
in the Initiailze() routine. Any ideas why I get no response from the "SendData(0x51, 0x0D);" all other commands at 9600 baud work fine.
#6
Posted 19 August 2011 - 12:55 AM
Nevermind, I got the autobadrating to work by changing the code to this;
SendDataAck(0x51, 0x0D);
UART.Close();
UART.BaudRate = 115200;
UART.Open();
//CheckResponce();
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users