While I was getting bored with my Go I came along this little bugger:
http://www.st.com/we...SS1532/PF259090
Anyone have experience with these running .net MF?
Cheers Olaf
  | ||||||||||||||
.net MF on 32F429IDISCOVERY
Started by beastyboy, Aug 20 2014 07:06 PM
23 replies to this topic
#1Posted 20 August 2014 - 07:06 PM While I was getting bored with my Go I came along this little bugger:
http://www.st.com/we...SS1532/PF259090
Anyone have experience with these running .net MF?
Cheers Olaf Van SchOten Ict Diensten en Services #2Posted 20 August 2014 - 07:11 PM ST has a setup already out there http://www.st.com/we.../tools/PF260087
However, its closed source :/ I hope either they release the source, or someone builds their own.
Cheers, -Matt #3Posted 20 August 2014 - 07:14 PM Hi Matt,
Yes I know I was just hoping someone was already hacking away with it So we could share some experiences and if its at all interesting to get one.
Cheers, Olaf Van SchOten Ict Diensten en Services #5Posted 21 August 2014 - 09:07 AM Hi Justin,
Yes sure, but I just found that little thing on mouser not knowing you obviously had been abusing it lol..
Cheers, Olaf
ps: I am ordering one now from mouser. Van SchOten Ict Diensten en Services #6Posted 21 August 2014 - 02:35 PM
Could you share what you guys have?
Cheers, -Matt #7Posted 21 August 2014 - 06:30 PM I have one laying around ... see how it works with .net ... should be not that difficult ... I'll share my experiences here as well ... #9Posted 21 August 2014 - 08:07 PM blast the usb driver refuses to install because of missing digital signature
anyone ??? #10Posted 21 August 2014 - 08:15 PM
Turn off digital signing?
#11Posted 21 August 2014 - 08:23 PM Got this now ??
#12Posted 21 August 2014 - 08:50 PM thx 2 juzzer's tip got to switch off the digital signing ... the driver installed now and even recognized the device ...
but blooming vs2012 does not see it for deploying ... no usb recognized device as .netmf deployable devices at all ...
any ideas left ???
well thinking about it ... I'd might check if mfdeploy has somthing to say ... maybe just the bootloader is on not the rest ... give me a minute ... or so ... #13Posted 21 August 2014 - 10:10 PM this is going not so well ...
using the st-link to open the hex files and program to flash ...
1. Tinybooter.hex 2. er_flash.hex 3. er_congfig.hex
but stil no recognition and deploy in VS2012.
doing only point 1 & 2 I get the following result in mfdeploy when doing device caps: Pinging... HalSystemInfo.halVersion: 4.3.0.0 HalSystemInfo.halVendorInfo: Copyright Oberon microsystems, Inc. HalSystemInfo.oemCode: 255 HalSystemInfo.modelCode: 0 HalSystemInfo.skuCode: 65535 HalSystemInfo.moduleSerialNumber: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF HalSystemInfo.systemSerialNumber: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF ClrInfo.clrVersion: 4.3.0.0 ClrInfo.clrVendorInfo: Copyright Oberon microsystems, Inc. ClrInfo.targetFrameworkVersion: 4.3.0.0 SolutionReleaseInfo.solutionVersion: 4.3.0.0 SolutionReleaseInfo.solutionVendorInfo: STMicroelectronics SoftwareVersion.BuildDate: Sep 25 2013 SoftwareVersion.CompilerVersion: 410713 FloatingPoint: True SourceLevelDebugging: True ThreadCreateEx: True LCD.Width: 240 LCD.Height: 320 LCD.BitsPerPixel: 16 AppDomains: True ExceptionFilters: True IncrementalDeployment: True SoftReboot: True Profiling: False ProfilingAllocations: False ProfilingCalls: False IsUnknown: False but after doing nr 3. the green/red led stop flashing and all is beyond recognition, in mfdeploy as well as vs
this behavior is the same when I turn off/disconnect the device from USB and reconnect. It is recognized by USB but won't do any in neither mfdeploy nor vs. #14Posted 21 August 2014 - 11:44 PM wooohaaa .... running ... don't ask me why ... probably when I power down the pc the next time it won't work .... this was an adventure ... I even managed to give the device a new usb name ... of course after that I had a breaking issue so I went back to the st-link utility and set the name bytes to hex 00 and the original usb name came up again. Back to VS, started deploying only to figure out you can not mixed netmf versions, so had to uninstall 4.3.1.0 and install 4.3.0.0 since the ST is on that and voila there we go it deployed and ran almost faster then I could blink but instead the LEDs did so we have a nice running a little blinky led and empty screen program on a not so stable disco board:
#15Posted 25 August 2014 - 02:40 PM @piwi
Are you running the STM port?
Cheers, -Matt #16Posted 25 August 2014 - 02:40 PM Double post. Edited by zeroaviation, 25 August 2014 - 02:40 PM. #18Posted 25 August 2014 - 02:46 PM Oberon port
#19Posted 25 August 2014 - 02:49 PM
if you mean the one from the ST web site .... Yes !!!
1:1 Unchanged and still on NetMF 4.3.0.0 ... #20Posted 25 August 2014 - 02:52 PM @Juzzer, are you using the STM32F429I Discovery board as well ? 0 user(s) are reading this topic0 members, 0 guests, 0 anonymous users | ||||||||||||||
|
||||||||||||||
This webpage is licensed under a Creative Commons Attribution-ShareAlike License. | ||||||||||||||