Hi! I am new to NetDuino community and also to the device!
I bought two NetDuino Plus 2 boards this week. Since i am new to them, so playing with them to understand how they work. One of the board has an issue now.
When i plug it in, and ping it, it says
"Pinging.....TinyBooter
Bootloader build inof: Netudino Plus 2(V4.2.2.2.) by Secret Labs LLC
Even without pressing the pushbutton at plug in, it appear in bootloader mode. When i press pushbutton, and select USB in .NETMF, it is blank.
Target->Device Capabilities show " No Supported"
I cannot enter TinyClr mode
I tried to re-install firmware using the link below
http://forums.netdui...-v422-update-2/
but DFUTester does not show the device (whether i press the pushbutton or not ).When i try to install the firmware using Dfuse Demonstration and try to chose firmware, Upgrade button get disabled.
In short, i cannot configure it as a server or client for my project. One of the device is working properly as server, when i try to send request to the server from client (this very same device which i mentioned above). it cannot send request and in .NET only "assemblies deploy " option appear.
I dont know what to do to tackle this situation.
Thanks
escallanio.