Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Deployment Errors Issue

Deplyoment Errors Netduino Plus 2 Device not found cannot be opened

  • Please log in to reply
2 replies to this topic

#1 nathantr3

nathantr3

    New Member

  • Members
  • Pip
  • 1 posts

Posted 08 July 2014 - 08:09 PM

I'm a first time user of netduino, using a netduino plus 2 board. I have followed these instructions:  

 

Please install in the following order:

 

  1 Microsoft Visual C# Express 2010

  2 .NET Micro Framework SDK v4.2

  3 Netduino SDK v4.2.2.0 (32-bit) or

Netduino SDK v4.2.2.0 (64-bit)

 

 

and then written a simple code to make the LED blink. I changed the setting in the projects properties tab to deploy to the board instead of the emulator, but when I click "Start Debugging" it pauses for a couple seconds and then displays, "There were deployment errors. Continue?"

             If I click "No" it just ends the build process and the error log says, "Device not found or cannot be opened - USB:Netduino".

             If I click "Yes" another box pops up that says, "TinyCLR Error: An exception occurred while attempting to launch the debugger: Object reference not set to an instance of an object." and then "The operation could not e completed. Unspecified error." And the error list still says the say error of "Device not found or cannot be opened - USB:Netduino"

 

I've done these steps: http://forums.netdui...-v422-update-2/ (except for the last step about updating network settings because I don't know what to do there, could that be my problem?) which allowed me to load my simple program once, but then the same errors happened if I tried to overwrite that program with a modified program (ie. changing the duration of the led blink).

 

I'm stuck, confused, and obviously new at this! Any help would be very appreciated!

 

Thanks,

Nate



#2 Frode

Frode

    Advanced Member

  • Members
  • PipPipPip
  • 202 posts
  • LocationNorway

Posted 10 July 2014 - 05:34 AM

Hi, can you show us the code you've written for blinking the led? I suspect that is where the problem is.

#3 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 11 July 2014 - 12:49 AM

Hi Nate,

Open up Netduino Update.

Push the button on your Netduino Plus 2 while powering it up via USB (to put it into bootloader mode).

When it appears in Netduino Update, click on "settings" for your Netduino Plus 2.

Go to the Tools tab and click "erase app".

Does this bring your Netduino back to life for you, so you can deploy a new app?

Chris

P.S. It looks like you're using the 4.2 firmware; have you considered using VS2012 and 4.3 instead?

Chris





Also tagged with one or more of these keywords: Deplyoment, Errors, Netduino Plus 2, Device not found, cannot be opened

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.