Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Strange I2C behavior on Netduino Plus 2

hardware i2c netduino plus 2

  • Please log in to reply
3 replies to this topic

#1 maliman

maliman

    New Member

  • Members
  • Pip
  • 3 posts

Posted 11 May 2013 - 06:04 AM

Hi All, I'm having no problem using I2C on Netduino Plus board. But as soon as I use NP2 I2C, bus transaction doesn't shows in oscilloscope. After doing some digging I found out that I2C transaction will start only if I connect the I2C slave after the NP2 finish initilization process. Meaning I have to wait after NP2 finish initialize and then connect the I2C slave. It doesn't happen with NP board, where i don't have to disconnect I2C slave everytime the NP reboot process. I've upgrade my NP2 firmware to v4.2.2.2. Thanks.

 

Nizam


  • kineyed likes this

#2 i182willsw

i182willsw

    Member

  • Members
  • PipPip
  • 12 posts

Posted 28 July 2013 - 09:38 AM

Well you're post helped a lot... maybe, I now know how to get my i2c on my netduino 2 working. but it is a pain to have to disconnect every time and then reconnect. anybody figure this out yet?



#3 iced98lx

iced98lx

    Advanced Member

  • Members
  • PipPipPip
  • 134 posts
  • LocationSouth Dakota

Posted 30 July 2013 - 09:10 PM

Mine is not behaving in that fashion- I leave both an i2c backpack hooked to an LCD and a 16 channel PWM breakout board connected through reboots with no problem.



#4 =M=

=M=

    New Member

  • Members
  • Pip
  • 1 posts

Posted 29 August 2013 - 12:28 AM

This is exactly how my NP2 behaves! Running latest firmware (4.2.2.2) on VS2010 with MF4.2.

Is there a fix for this problem?







Also tagged with one or more of these keywords: hardware, i2c, netduino plus 2

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.