Reset board
#1
Posted 13 August 2010 - 10:29 PM
#2
Posted 13 August 2010 - 11:01 PM
I have been having a great time programming my Netduino.I would like to reset all the pins and the button to its original (factory) state. I see the reset pin, but I'm not sure how to use it. Any help? Thanks!
ATXCoder,
Welcome to the forums!
If you just want to erase your current Netduino App off of your Netduino (which should take it back to "out of box" state):
* Run MFDeploy.exe (from Start menu > Programs > Microsoft .NET Micro Framework 4.1 > Tools)
* Select USB transport; your Netduino should appear in the device dropdown
* Press the ERASE button
If you want to completely wipe off your Netduino and reflash the firmware from scratch:
* Community member Jason posted instructions here: http://forums.netdui...indpost__p__347
Does that take care of your needs?
Chris
#3
Posted 13 August 2010 - 11:44 PM
ATXCoder,
Welcome to the forums!
If you just want to erase your current Netduino App off of your Netduino (which should take it back to "out of box" state):
* Run MFDeploy.exe (from Start menu > Programs > Microsoft .NET Micro Framework 4.1 > Tools)
* Select USB transport; your Netduino should appear in the device dropdown
* Press the ERASE button
If you want to completely wipe off your Netduino and reflash the firmware from scratch:
* Community member Jason posted instructions here: http://forums.netdui...indpost__p__347
Does that take care of your needs?
Chris
Running MFDeploy.exe and hitting "ERASE" reset all the pins. Thanks Chris!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users