It's native code if I'm correct. If not, Chris may correct meWhat is running on them?, native code?
Ethernet Module Update
#21
Posted 27 July 2012 - 09:08 AM
- Chris Walker and ceardorie like this
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#22
Posted 27 July 2012 - 09:14 AM
It's native code if I'm correct. If not, Chris may correct me
this can be interresting.. I have one of those en28j60 adapters in the post somewhere, and and stm32f0 discoveryboard on my desk, same stm as this.. Guess I have to try to marry those.
(I still will be ordering that ethernet module of course.. )
--
Asbjørn
#23
Posted 27 July 2012 - 09:15 AM
Correct. One upvote for StefanIt's native code if I'm correct. If not, Chris may correct me
The SD and Ethernet modules are running a really early version of the "standard IO firmware for STM32F", supporting virtual SPI channels. We'll continue enhancing these modules' firmware over time as well...
Did I mention that I love the brawn of these chips?
Chris
#24
Posted 27 July 2012 - 09:17 AM
Oh, you're welcome to do either/both We've already posted the schematics, and will make the firmware available as soon as it's tested (probably the same time that we program them for shipping).this can be interresting.. I have one of those en28j60 adapters in the post somewhere, and and stm32f0 discoveryboard on my desk, same stm as this.. Guess I have to try to marry those.
(I still will be ordering that ethernet module of course.. )
Chris
#25
Posted 27 July 2012 - 08:01 PM
About this:
3. Reflashing using the USART pins (and ST's Flash Demo Loader application...or the reflash tool provided on Netduino).
1. Are you sure about the ST Flash Loader application? Version 2.5.0 does not support flashing the STM32F0x series. Can you please share a link to the updated tool?
2. About the 'reflash tool provided on Netduino': can you please provide a link to the RTM version of the tool? The last version I tested did not work properly with the Display Module.
Thanks,
-Fabien.
#26
Posted 27 July 2012 - 08:17 PM
I've been using our Netduino-based flash code, but 2.5.0 is listed as the supported flashing tool on the STM32F051's webpage:1. Are you sure about the ST Flash Loader application? Version 2.5.0 does not support flashing the STM32F0x series. Can you please share a link to the updated tool?
http://www.st.com/in...duct/251901.jsp
There I go making assumptions that ST's website is correct A dangerous thing, I know! You may want to ping ST and see if there's a config file needed (of if the 2.5.0 update on their website has been updated with new options without changing the version number).
We're not to RTM yet, but the code in the latest flash app should work as a template for the [nwazet Touch Display Module. Please let me know what's not working for you in the following app and we'll help get you up and running:2. About the 'reflash tool provided on Netduino': can you please provide a link to the RTM version of the tool? The last version I tested did not work properly with the Display Module.
http://forums.netdui...e-v4201-beta-1/
Chris
#27
Posted 27 July 2012 - 10:15 PM
2.5.0 is listed as the supported flashing tool on the STM32F051
While the tool is capable of flashing an STM32F0x chip, it is missing several STM32F0 device map files.
I created a map file for the STM32F051 Medium Density with 64K of flash (see the attachment) and tested it against an STM32F051 Discovery board.
-Fabien.
Attached Files
#28
Posted 27 July 2012 - 10:28 PM
Very nice, Fabien. Thanks for sharing this.I created a map file for the STM32F051 Medium Density with 64K of flash (see the attachment) and tested it against an STM32F051 Discovery board.
Chris
#30
Posted 18 August 2012 - 12:28 AM
The firmware and drivers for the SD card modules are the basis of the Ethernet module as well.With the recent news of the SD Card module becoming available, any love for the Go Ethernet?
We should be done validating the Ethernet module in the next week or so. Once it passes all of our validation tests, we should be sending it off for manufacturing.
Chris
#31
Posted 18 August 2012 - 04:00 AM
#32
Posted 19 August 2012 - 05:02 PM
#33
Posted 07 September 2012 - 12:05 PM
ntools
TCP Listener (Beta) · FTP Server (Alpha)
Netduino Plus Go Module · Xml Parser
http://ntools.codeplex.com/
#34
Posted 07 September 2012 - 07:01 PM
Is the Netduino Plus an option for your project?Can it really be true, that it seems almost impossible to find a descent alternative to the upcoming ethernet module?
#35
Posted 09 September 2012 - 05:43 PM
Thanks for the update Chris. You made my day
Also, since we're on the subject of new modules: [nwazet has a new undisclosed module for release in early August ;-) So, definitely a busy summer...
Cheers,
-Fabien.
Hi Fabien,
Do you have the ethernet modules for NGo available right now in Nwazet?I coudln't find them.
#36
Posted 09 September 2012 - 06:58 PM
There are three new modules shipping. SD Card is first (29-September) followed by the Mystery Module and then the Ethernet module.Hi Fabien,
Do you have the ethernet modules for NGo available right now in Nwazet?I coudln't find them.
Then the Ambient Light and XBee modules are coming a bit later this autumn.
Chris
#37
Posted 10 September 2012 - 04:53 AM
Hi Giuliano,
There are three new modules shipping. SD Card is first (29-September) followed by the Mystery Module and then the Ethernet module.
Then the Ambient Light and XBee modules are coming a bit later this autumn.
Chris
Thanks Chris, that's great news. I know nwazet has already the SD module in stock, should I wait until September 29th until the release date or the ones available now are the same exact SD module?
What is the Ambient Light?
#38
Posted 10 September 2012 - 05:12 AM
The Ambient Light module is a luminosity sensor. Its main job is to detect brightness. It's using a really nice digital sensor so that it works as well outdoors as it does indoors, and under varying types of indoor light.What is the Ambient Light?
Here's a link to the full details:
http://forums.netdui...-module-update/
Chris
#39
Posted 10 September 2012 - 06:16 AM
Is the Netduino Plus an option for your project?
Got the N+ atm, but could really use some more memory. That's the whole point switching to NGo - hopefully it can be used as a DPWS client/server
After posting my earlier message, I found the ENC28 + mIP solution which I'm gonna tryout.
ntools
TCP Listener (Beta) · FTP Server (Alpha)
Netduino Plus Go Module · Xml Parser
http://ntools.codeplex.com/
#40
Posted 10 September 2012 - 02:06 PM
Many of the items on the Nwazet site are pre-orders, like the SD Module. You'll notice right under the title that it gives you an estimated date of availability. They would be the same SD Module and you could pre-order now if you like.Thanks Chris, that's great news. I know nwazet has already the SD module in stock, should I wait until September 29th until the release date or the ones available now are the same exact SD module?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users