- Netduino Forums
- → ItsDan's Content
ItsDan's Content
There have been 71 items by ItsDan (Search limited from 12-May 23)
#31194 Thinking about a community run Maker Challenge
Posted by ItsDan on 25 June 2012 - 11:24 AM in Netduino Go
#30732 Considering a ND Go! for next project
Posted by ItsDan on 15 June 2012 - 03:08 PM in Netduino Go
What you linked is a type Y gadgeteer module, and I believe the Go only supports SUX types. The 'equivalent' Go module is the Nwazet Relay Module, which has a single relay on it.
#30597 Module Firmware
Posted by ItsDan on 12 June 2012 - 06:24 PM in Netduino Go
#30480 3x4 Keypad Module
Posted by ItsDan on 10 June 2012 - 04:03 AM in Netduino Go
#30217 Seven Segment Display Module
Posted by ItsDan on 05 June 2012 - 05:55 AM in Netduino Go
A real module is in the works but this is a prototype 12 button keypad module (made on a production Protomodule board) that I'm using to interact with the display module. I'll be keeping this thread updated about the keypad module, and I highly recommend Matt's display module if it fits your project.
http://www.youtube.com/watch?v=Egudmsx7lmI
#30216 3x4 Keypad Module
Posted by ItsDan on 05 June 2012 - 05:48 AM in Netduino Go
#30114 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 02 June 2012 - 02:29 PM in Netduino Go
#29117 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 15 May 2012 - 05:35 PM in Netduino Go
This sounds like a marrage made in heaven Dan. Using the discovery board as a programmer for the proto module seems like a cheaper and more flexible solution rather than buying a separate programmer. Would you be willing to provide more details on your configuration?
You mean the configuration for programming? On the Revision C boards (all the ones you've seen pictures of) you simply connect the 4 male jumpers on the Discovery board to 4 specific pins on the protomodule (3.3v, swim, gnd, reset), I forget the pin numbers, but it's not important because on Rev D (the ones we'll actually be shipping) we've added space for a 4 pin header on the board already connected to the right pins so you'll just connect it that way, should be simple.
#29103 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 15 May 2012 - 12:19 PM in Netduino Go
Let's not forget that with a lot of hobby projects it's the journey not the destination that's the important bit.
Maybe Aaron and Dan aren't making the protomodule because it fills a gap that other existing tools don't support, but because they want to and are having fun.
Fred, Thanks for the support and I agree with your sentiment. Having never gone through the process of seeing a project like this through from computer design files to physical device to functional demo it's been interesting and a lot of fun (and slightly pricey), and I'm a "learn by doing" type of person. This is also something of a test run, I have some parts scattered on my desk that we're exploring for further modules (some attached to protomodules ), those should be more useful towards filling the lack of useful modules. But as far as this one, if people find value to it, we're glad to be able to offer it, as Fabien pointed out there are other options too, and I actually recommend the Discovery board. It was easy to use and setup and I use one here to program my protomodules.
I've attached an image of a bare PCB next to the discovery board. Note that the actual prototype area on the discovery is the parts below the routed slots. The part above those slots is the ST Link programmer, which is what I connect to the SWIM connector to program the chip on the protomodule.
#29033 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 14 May 2012 - 05:48 PM in Netduino Go
#29014 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 14 May 2012 - 02:44 PM in Netduino Go
#28954 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 13 May 2012 - 02:49 PM in Netduino Go
#28953 STM8S-DISCOVERY - KIT
Posted by ItsDan on 13 May 2012 - 02:46 PM in Netduino Go
#28763 DIY Go Cables
Posted by ItsDan on 09 May 2012 - 11:24 PM in Netduino Go
#28695 DIY Go Cables
Posted by ItsDan on 09 May 2012 - 12:35 AM in Netduino Go
#28520 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 03 May 2012 - 11:24 PM in Netduino Go
#28489 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 03 May 2012 - 03:06 PM in Netduino Go
Just out of curiosity, what 'module source' do you have?
I'll have to check when I get home but it's a zip with your CW2 handle on it and it's an IAR Workbench workspace from I want to say the tail end of March as timestamps on the files. I'll be more specific a bit later, obviously it would be great if that's all it was (out of date source).
#28488 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 03 May 2012 - 02:55 PM in Netduino Go
When can this be ordered and for which amount?
So far I've got all Go! modules, you know the tagline of Pokémon? Gotta catch 'em all
We're still working out logistics on getting them made up and assembled and exploring all our options there. We obviously want to make them as affordable as we can so that the 'Go! Bus' isn't a barrier to entry on using the Netduino Go. We're currently waiting on quotes from some various suppliers and assembly houses. Hopefully we can state a price and timeline to being available in the next couple weeks.
#28485 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 03 May 2012 - 02:49 PM in Netduino Go
#28478 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 03 May 2012 - 01:41 PM in Netduino Go
#28476 Prototype module prototyped on a prototype Protomodule
Posted by ItsDan on 03 May 2012 - 12:56 PM in Netduino Go
#28112 Building custom go!bus modules for Netduino Go
Posted by ItsDan on 26 April 2012 - 02:10 AM in Netduino Go
These are the prototypes of the prototyping modules Arron and I (mostly Arron) are building. These ProtoModules will let you prototype new modules or connect miscellaneous hardware to your Netduino Go. All the pins on the microcontroller are broken out to standard headers, and there's a prototyping area that includes a 3.3v, 5.v, and ground bus. The final version will accomodate a mini-breadboard.
#27941 Do all Go modules have the STM8S IC chip on them
Posted by ItsDan on 23 April 2012 - 12:19 PM in Netduino Go
#27807 Many many PWMs
Posted by ItsDan on 21 April 2012 - 11:56 AM in General Discussion
#27763 Netduino Go! RGB Umbrella
Posted by ItsDan on 20 April 2012 - 10:27 PM in Project Showcase
- Netduino Forums
- → ItsDan's Content
- Privacy Policy