Don't give up too soon...

That message you get from SAM-BA, you get when there still is a tinybootloader present. So did you actually erase it?

Finally it worked.
I switched to a Windows 7 32 bit and tried again. Seemed to help. bootloader installed and flashing 4.1.0.6 now.

Thanx guys

It's possible, but not a big chance its done by accident. See http://wiki.netduino...ep-by-step.ashx for instructions to remove and reflash the tinybootloader.

I give up. the samba says no board when i start it, and when i select the correct board "at91sam7x512-ex" it fails with something like unknown ID

GREAT !

Any chance the TinyBooter can be erased ?

Hi Chris, I'we tried the holding the SW1, power on, press the ping thing. Found it on the forum. But i just keep getting the TinyCLR As long as i hold the SW1, i get no response from the ping. only when i release it do i get TinyCLR. Am i not holding it long enough ? Also, could you lend me a hand to press the ping button 2 doesn't seem to be enough for holding sw1, unplugging and replugging the usb and pressing ping. /Oddmar

Hi Chris, and thanx for the welcome and quick reply

I have tried rebooting, unplugging, erasing, holding the SW1 while connecting the N+.

I can deploy programs to the N+ with VS2010 but i just cant configure anything. And now it also seems i cant flash it either.
Getting "Error: No response from device" error.

Hope you can help. Have had the NetDuino plus for only 1 day

Hi oddmar,

That's a very curious error. Have you tried rebooting your computer, unplugging/re-attaching your Netduino Plus, etc.?

Two other things to try:
1. Try reflashing the firmware (or upgrade to the new .NET MF 4.2 RC1).
2. Try reflashing just the ER_CONFIG file from the firmware.

Does that help?

Welcome to the Netduino community,

Chris

In MFDeploy, when i go to Target > Configuration > "USB name, usb configuration or Network" i get the following error "Device has old or unsupported configuration" My current configuration: HalSystemInfo.halVersion: 4.1.2821.0 HalSystemInfo.halVendorInfo: Netduino Plus by Secret Labs LLC HalSystemInfo.oemCode: 34 HalSystemInfo.modelCode: 177 HalSystemInfo.skuCode: 4097 HalSystemInfo.moduleSerialNumber: 00000000000000000000000000000000 HalSystemInfo.systemSerialNumber: 0000000000000000 ClrInfo.clrVersion: 4.1.2821.0 ClrInfo.clrVendorInfo: Netduino Plus by Secret Labs LLC ClrInfo.targetFrameworkVersion: 4.1.2821.0 SolutionReleaseInfo.solutionVersion: 4.1.0.6 SolutionReleaseInfo.solutionVendorInfo: Netduino Plus by Secret Labs LLC SoftwareVersion.BuildDate: Feb 14 2011 SoftwareVersion.CompilerVersion: 400902 FloatingPoint: True SourceLevelDebugging: True ThreadCreateEx: True LCD.Width: 0 LCD.Height: 0 LCD.BitsPerPixel: 0 AppDomains: True ExceptionFilters: True IncrementalDeployment: True SoftReboot: True Profiling: False ProfilingAllocations: False ProfilingCalls: False IsUnknown: False DeviceInfo: HAL build info: 4.1.2821.0, Netduino Plus by Secret Labs LLC OEM Product codes (vendor, model, SKU): 34, 177, 4097 Serial Numbers (module, system): 00000000000000000000000000000000 0000000000000000 Solution Build Info: 4.1.0.6, Netduino Plus by Secret Labs LLC AppDomains: default, id=1 Assemblies: mscorlib,4.1.2821.0 Microsoft.SPOT.Native,4.1.2821.0 Microsoft.SPOT.Hardware,4.1.2821.0 Microsoft.SPOT.Net,4.1.2821.0 System,4.1.2821.0 Microsoft.SPOT.IO,4.1.2821.0 System.IO,4.1.2821.0 Microsoft.SPOT.Hardware.SerialPort,4.1.2821.0 Microsoft.SPOT.Hardware.Usb,4.1.2821.0 SecretLabs.NETMF.Hardware,4.1.0.0 SecretLabs.NETMF.Diagnostics,4.1.0.0 NetduinoPlusApplication1,1.0.0.0 SecretLabs.NETMF.Hardware.NetduinoPlus,4.1.0.0