@Baxter, yep an update on codeplex might squeeze out some minor things that now and than cause some unexpected and surprising effects, until than I have to stick with what I've got and yes I patched the CC3000 boot with the stellaris and executed a smart config with it as well.

At the moment the cc3000 just does not connect to my secured AP, only unsecured will work ????

Any idea how I can get the secured one working ?

My idea, smart configuring the secured AP via stellaris and the iPad sending the beacon but no idea if this works. Can't do at the moment since I'm not there where the devices are .... I'll keep updating when I'll have the result though ...

Ha, you said you update the WRL-CC3000V2 succesfully. I've got a couple of those laying around ! That's good news, it worked. Can you let me know with what HW you got that working, a clear picture with the wiring would be nice.

and the next step ... DHCP works but still no connection to the network .... hmm ... I'll keep on trying ... 

CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingResponse Received -- Simple Link Start ConfirmedSetting Event MaskSend 0008 startingResponse Received -- Event Mask confirmedRequesting SP VersionSend 0207 startingResponse Received -- SP Version is 0.6.1.24Requesting Buffer SizeSend 400B startingResponse Received -- Buffer Available: 6, Size: 1500Configuring DHCPSend 2001 startingResponse Received -- DHCP Configured. The thread '<No Name>' (0x3) has exited with code 0 (0x0).Resetting Connection before setting Policy. Send 0002 startingConnection Disconnect.Setting Connection Policy.Send 0004 startingResponse Received -- Connection Policy SetAttempting Connection to AK16Send 0001 starting

this is done within a seconds notice ...

with a smart config via an iPad4 ...

Example App:driver version 5.14.7.13MAC 08:00:28:01:6F:DBSP: 0.6.1.2401Smart config DONEDONEIP:192.168.39.18

and look ma without any resistors ....

The thread '<No Name>' (0x2) has exited with code 0 (0x0).CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingResponse Received -- Simple Link Start ConfirmedSetting Event MaskSend 0008 startingResponse Received -- Event Mask confirmedRequesting SP VersionSend 0207 startingResponse Received -- SP Version is 0.6.1.24Requesting Buffer SizeSend 400B startingResponse Received -- Buffer Available: 6, Size: 1500Configuring DHCPSend 2001 starting

Direct wiring a CC3000 Boost to a cerbuino with 4.3 ... sorry but my n+ does not do 4.3 ....

why the DHCP does not work .... no clou but there is always something ...

the patching worked ....

Example App:driver version 5.14.7.13MAC 08:00:28:01:6F:DBSP: 0.6.1.24

trying the software is again a complete different story ...

'Microsoft.SPOT.Debugger.CorDebug.dll' (Managed): Loaded 'C:UsersPeterCloudStationDevCerbuino4.3CC3KWifiExampleAppbinDebugleWifiExampleApp.exe', Symbols loaded.The thread '<No Name>' (0x2) has exited with code 0 (0x0).CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingSetting Event MaskSend 0008 startingSend 400B startingConfiguring DHCPSend 2001 starting

and there it waits forever ...

Looks like a new service pack is available(V1.11.1),

http://processors.wi...atch_Programmer

http://processors.wi...#Version_1.11.1

It seems to be mostly network bug fixes.

@Baxter, thanks for the hint.

Here is a video of some of the new features in action!

 

http://www.youtube.c...h?v=LjZbpr2qPqU

Just Awesome !! 

Any ATA of the software ?

Can the CC3000 be powered through a gadgeteer socket ?

I just bought a new cc3000 chip with the new symbolization, but it had the old firmware.  So, I decided this weekend to start work on a C# based firmware flasher.  Nearly all the code is done, but it likely has bugs, but I am going to test extensively before I try anything on my guinea pig cc3000.  Also, I have added several key tests in the initialization to give useful errors when the communications are not working...  This will easily enable a remote update because the patch location can be anywhere.  

man .... this is so cool .... tell me, can you walk on water as well ....

Hi Baxter, welcome to the club.

I have got two CC3000 Boost both on patch 19. The one works pretty much constantly and can even handle UDP packets. The other one, as well on patch 19 gives me the creeps though. Sofar not succeeded in coming even close to the first one ?????? 

If I use the second on a TI Sellaris board it just connects and get's an IP address, wunderfull, unsecured but working. But when I exchange the first one with the second one and you would think, same setup, same patch, same power supply and same software, well nothing is more surprising then good old TI always open for a surprise...it just doesn't ....... work. Although this one is secured thru WPA/WPA2 etc.

CC3000 Web Server Example ApplicationSending - Simple Link StartSend 4000 startingSend 4000 startingSend 4000 startingSend 4000 startingSetting Connection Policy.Send 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingSend 4000 startingSend 0004 startingAttempting Connection to AK16-USSend 0001 startingSetting Event MaskSend 0008 startingRequesting SP VersionSend 0207 startingRequesting Buffer SizeSend 400B startingConfiguring DHCPSend 2001 starting

beats me ....