or this one as well https://www.ghielect.../topic?id=13347

.... maybe there will be an alternative (STM32F427, Wifi, 4.3) ....

.... interrested ? ....

......

 

But, when I get the cc3100 tomorrow, I'll probably focus more on that. 

@Valkyrie-MT, you'll have to let the guys know this over here as well .... some very nice news ... a job well done 

Both, but mostly the CC3000. Do you have a link to the GHI forum topic in question?

try https://www.ghielect...h.wqs8ypHN.dpuf

@Baxter, yep an update on codeplex might squeeze out some minor things that now and than cause some unexpected and surprising effects, until than I have to stick with what I've got and yes I patched the CC3000 boot with the stellaris and executed a smart config with it as well.

At the moment the cc3000 just does not connect to my secured AP, only unsecured will work ????

Any idea how I can get the secured one working ?

My idea, smart configuring the secured AP via stellaris and the iPad sending the beacon but no idea if this works. Can't do at the moment since I'm not there where the devices are .... I'll keep updating when I'll have the result though ...

Ha, you said you update the WRL-CC3000V2 succesfully. I've got a couple of those laying around ! That's good news, it worked. Can you let me know with what HW you got that working, a clear picture with the wiring would be nice.

with a smart config via an iPad4 ...

Example App:driver version 5.14.7.13MAC 08:00:28:01:6F:DBSP: 0.6.1.2401Smart config DONEDONEIP:192.168.39.18

and look ma without any resistors ....

The thread '<No Name>' (0x2) has exited with code 0 (0x0).CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingResponse Received -- Simple Link Start ConfirmedSetting Event MaskSend 0008 startingResponse Received -- Event Mask confirmedRequesting SP VersionSend 0207 startingResponse Received -- SP Version is 0.6.1.24Requesting Buffer SizeSend 400B startingResponse Received -- Buffer Available: 6, Size: 1500Configuring DHCPSend 2001 starting

Direct wiring a CC3000 Boost to a cerbuino with 4.3 ... sorry but my n+ does not do 4.3 ....

why the DHCP does not work .... no clou but there is always something ...

and the next step ... DHCP works but still no connection to the network .... hmm ... I'll keep on trying ... 

CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingResponse Received -- Simple Link Start ConfirmedSetting Event MaskSend 0008 startingResponse Received -- Event Mask confirmedRequesting SP VersionSend 0207 startingResponse Received -- SP Version is 0.6.1.24Requesting Buffer SizeSend 400B startingResponse Received -- Buffer Available: 6, Size: 1500Configuring DHCPSend 2001 startingResponse Received -- DHCP Configured. The thread '<No Name>' (0x3) has exited with code 0 (0x0).Resetting Connection before setting Policy. Send 0002 startingConnection Disconnect.Setting Connection Policy.Send 0004 startingResponse Received -- Connection Policy SetAttempting Connection to AK16Send 0001 starting

this is done within a seconds notice ...

the patching worked ....

Example App:driver version 5.14.7.13MAC 08:00:28:01:6F:DBSP: 0.6.1.24

trying the software is again a complete different story ...

'Microsoft.SPOT.Debugger.CorDebug.dll' (Managed): Loaded 'C:UsersPeterCloudStationDevCerbuino4.3CC3KWifiExampleAppbinDebugleWifiExampleApp.exe', Symbols loaded.The thread '<No Name>' (0x2) has exited with code 0 (0x0).CC3000 Internet Time ExampleSending - Simple Link StartSend 4000 startingSetting Event MaskSend 0008 startingSend 400B startingConfiguring DHCPSend 2001 starting

and there it waits forever ...