Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.

xc2rx

Member Since 05 Aug 2010
Offline Last Active Aug 09 2015 04:13 AM
-----

Posts I've Made

In Topic: Deep dive on Asix AX88796C (Netduino 3 Ethernet's fancy new networking chip)

08 August 2015 - 06:59 PM

Hi Chris,

 

Thanks for the detail description of the new Netduino 3 ethernet chip. I like descriptive post like this one, keep it coming. I will play with the Ethernet version once I'm through with the Wifi version. BTW, haven't looked at the datasheet of the Ethernet ASIX, can it achieve true 100Mbps throughput (or close to it) at the C driver level? What's the maximum SPI speed? I know all these answers are in the datasheet but I'm short on time so haven't had a chance to read through it.


In Topic: SPLIT: Integrated MAC and 10 vs 100 mbps

14 July 2015 - 06:21 PM

And btw, there are Ethernet versions of the Netduino3 here: http://www.amazon.co.../dp/B00WAHCKEK/

 

But still not possible to order from outside US, and the shop that should allow for that is nowhere to be seen.

 

Where can I find information about the Netduino 3 Ethernet board? I don't see it anywhere on the netduino.com website. I want to see the schematic if possible. Thanks!


In Topic: CC3100 external memory/flash requirements?

14 July 2015 - 02:11 AM

Damn I already bought some connectors from Mouser.


In Topic: CC3100 external memory/flash requirements?

14 July 2015 - 12:43 AM

Nevermind, I found the JTAG connector part number in the schematic: FCI 20021121-00010C4LF


In Topic: CC3100 external memory/flash requirements?

14 July 2015 - 12:25 AM

OH!!! I didn't realize that CC3100 and CC3100MOD are different. Now that makes complete sense. I just ordered a Netduino 3 from Amazon. By the way, will it be possible for you to provide the part number for the JTAG header? Just in case I want to debug the firmware using my Segger J-Link. Thank you!


home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.