- Netduino Forums
- → Viewing Profile: Posts: sweddle
The Netduino forums have been replaced by new forums at community.wildernesslabs.co.
This site has been preserved for archival purposes only
and the ability to make new accounts or posts has been turned off.
About Me
Live in San Jose CA, Dev in C# and VB.Net run and Host local Geek Nights and Geek Sundays in San Fran and San Jose http://tinyurl.com/geeknight
Community Stats
- Group Members
- Active Posts 12
- Profile Views 11379
- Member Title Member
- Age Age Unknown
- Birthday Birthday Unknown
-
Gender
Male
Posts I've Made
In Topic: windows app controling the netduino?
03 November 2010 - 07:55 PM
@Chris, thanks for the update! As if the Netduino wasn't cool enough on its your support and replays to post and feature requests make it all that much better!
Thanks
Shane
In Topic: windows app controling the netduino?
01 November 2010 - 07:08 PM
Its been a bit of time and no such luck...
http://forums.netdui...good-ol-arduino
Maybe some day we will have the technology to do serial via USB...
Like the ol Arduino did/does and well most any other device you can program via USB, I know I'm asking to put a man on the moon here but its been done.
In Topic: Serial.read via USB? yu know like on the good ol Arduino.
06 October 2010 - 04:53 PM
working on some USB communication options
Sweeet! I look forward to see how it works, Thanks!
Shane
In Topic: Steps to restore an Erased Netduino
01 October 2010 - 09:32 PM
-The Short and The Long-
The Short:
Don’t use Aggsoft’s “Advanced USB Port Monitor” with a USB device that uses the Micro .Net framework and MFDeploy.exe… They get in fights!
The Long:
So it’s all working fine and dandy now. I was able to fix my Netduino via a 2nd PC.
The only thing I needed to use the 2nd PC for was MFDeploy to load the Netduino firmware (NetduinoFirmware_v4.1.0.3).
I was able to use the SAM-BA app to do the low level stuff on the fist PC and therefore had not thought that the 1st PC was having any true problems.
So after I got the Netduino working again on the 2nd PC I thought I would or could possibly via MFDeploy ping my Netduino. Nope still hangs, this is when I started to question if the Aggsoft’s USB app could have jacked with something that only MFDeploy need to use and nothing else… OK uninstall Aggsoft’s USB app, Reboot and wooohooo success MFDeploy Ping works like a champ.
So whatever the Aggsoft’s USB app did MFDeploy and VS2010 USB deployment does not like it.
This all came about because I bricked/looped my Netduino loading some code from Button-Blink example and needed to reset/erase it via MFDeploy, If all goes well I can get back to hunting that bug, woohoo!
A BIG thanks to the Netduino team for their wonderful show of support!
Shane
P.S. As for my Netduino robot taking over the world this weekend, my wife said I got yard work to do first and my robot said no he won’t help… stupid robot stupid wife, what I need is a “Cherry 2000” that runs .Net, you guys working on those yet?
In Topic: Steps to restore an Erased Netduino
01 October 2010 - 07:19 PM
Hey Chris,
Thanks for the help! It's nice to see you guys are responsive and helpful, gives me even more hope for the development and success of the product, woohoo!
OK so I think I did the adding two zeros thing right in SAM-BA.(see screen shot)
- I then disconnected and reconnected the netduino.
- Opened MFDeploy.exe
- Selected netduino under USB.
- Ping.... (No dice)
- MFDeploy seems to hang but in Task manager it dose not state "not responding" if I let it set for about 20 min it will come back that it can not ping..
Note: I m now loading all the tools on another PC, who know maybe my MFDeploy or USB drivers are jacked...
-Will report my findings-
Shane
Thanks for the help! It's nice to see you guys are responsive and helpful, gives me even more hope for the development and success of the product, woohoo!
OK so I think I did the adding two zeros thing right in SAM-BA.(see screen shot)
- I then disconnected and reconnected the netduino.
- Opened MFDeploy.exe
- Selected netduino under USB.
- Ping.... (No dice)
- MFDeploy seems to hang but in Task manager it dose not state "not responding" if I let it set for about 20 min it will come back that it can not ping..
Note: I m now loading all the tools on another PC, who know maybe my MFDeploy or USB drivers are jacked...
-Will report my findings-
Shane
- Netduino Forums
- → Viewing Profile: Posts: sweddle
- Privacy Policy