Netduino home hardware projects downloads community

Jump to content

The Netduino forums have been replaced by new forums at This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.

Toine db

Member Since 19 Jul 2012
Offline Last Active Jan 13 2013 11:29 AM

Posts I've Made

In Topic: Netduino Plus 1 Firmware v4.2.0 (update 1)

13 January 2013 - 11:31 AM

Hi Toine db,



Could you please erase and re-flash the board one more time?  But this time, do a few extra things?

  • After executing "enable flash", execute "erase all flash".  Then "set flash as boot" as before.
  • After starting the firmware flashing, be careful not to switch windows.  It's possible for the status box and questions to appear _behind_ the current window.

BTW, just to verify: are you using the latest SAM-BA (2.12 + patch)?




Hello Chris,


Sorry for the late response and thank you very much for your help.


It finaly worked for me, I don't know exactly what went wrong.


The only thing I missed was the Patch for sam-ba, after I patched sam-ba all worked fine.


Thanks again!

In Topic: Netduino Plus 1 Firmware v4.2.0 (update 1)

31 December 2012 - 10:07 AM

Hi Toine db, After "enabling flash access", do you then flash the TinyBooterloaderDecompressor.bin file? And verify that it was written correctly? If yes, what does your Netduino appear as in Device Manager? Chris


Tnx for the response.


I had selected the TinyBooterloaderDecompressor.bin to Flash and pushed "Execute".

But I have never seen the 'lock region' question.... (waited for 10 minutes)


The device is now in the device manager as "unknown device".

But I have tried it with winusb or mfusb and it gave error code 10, could not start device and not visible at MFDeploy and SAMBA.

In Topic: Netduino Plus 1 Firmware v4.2.0 (update 1)

30 December 2012 - 05:13 PM



I have a N+ and can't find the Netduino during the "http://wiki.netduino...ep-by-step.ashx" after flashing to "Enable Flash access".


My Windows 8 Pro installations finds device, but can not find a driver for this. (even after manualy trying to set winusb or mfusb)

I have tried to reinstall all version for 4.1 again but no succes, and even tried the same with 4.2 and again with no succes.


At this moment the N+ led stays on, but I can't reach the device to update/flash to any new or old firmware.


Any ssuggestions how to fix this?


home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.