Peter Forstmeier - Viewing Profile: Likes - Netduino Forums
   
Netduino home hardware projects downloads community

Jump to content

  2. → Viewing Profile: Likes: Peter Forstmeier

The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.

Peter Forstmeier

Member Since 25 Sep 2013
Offline Last Active Mar 25 2015 06:30 PM
-----

#53803 LCD

Posted by Peter Forstmeier on 03 November 2013 - 07:02 PM

Hi List,

i get this LCD:

 

http://club.dx.com/reviews/text/118059

 

and wirte them with these layout:

 

http://netmftoolbox....ailable classes

 

I connect the NetDuino  directly to the LCD, omiting the breadboard,

 

So:

GND    -> Pin1(LCD)

3V   -> Pin 2 (LCD)

empty ->PIN3

Pin8   -> Pin4

empty  -> Pin 5

empty  -> Pin 16

 

the rest is done as on the drawing.

 

I use the classes here and the code runs just fine, but LCD is dark.

 

Any idea whot wrong with the wiring?

 

Thanks in advance

Peter

 




#53688 Bluetooth

Posted by Peter Forstmeier on 27 October 2013 - 05:38 PM

Hi List,

somebody (me) with no idea about electronics try to do the following:

Talk to::

RB Bluetooth Transceiver Specfication:

 

 

- Bluetooth Chip:CSR BC417143 - Bluetooth Specification: v2.0+EDR - Transfer rate:2.4~2.48GHz unlicensed ISM band - USB Protocal:USB v1.1/2.0 - Modulation method:GFSK(Gaussian Frequency Shift Keying) - Transmitter power:?4dBm, Class 2 - Transmission range:20~30m in free space - Sensitivity:?-84dBm at 0.1% BER - Transfer rate:Asynchronous: 2.1Mbps(Max) / 160 kbps;Synchronous: 1Mbps/1Mbps - Security:Authentication and encryption - Support profiles:Bluetooth serial port- - Serial defualt setting:115200/N/ 8/1 - LED indicator light:Search(Power)/Connect - Input power:+5V~+12VDC/+3.3VDC 50mA - Work temperature:–20°C~+55°C

 

from my N+2.

I try the code from #Netduino Home Automation Projects' but no Chance.

I get only the red light(Power) to blink.

 

By the way, my Laptop has buildin Bluetooth, did i need a PC-Dongle as well??????

 

Any ideas

Thanks

Peter




#53288 Nokia 5110 LCD

Posted by Peter Forstmeier on 20 October 2013 - 04:33 PM

Hi List,

i have connected my Nokia 5110 Display to the N+2 and can write some text to the Display.

If i write  a_str, and later on b_str, both strings are start at Location (0,0) and overwrite each other

Is there any idea how to

a)Clear the Display

B) Write text at a given Location

c) Change the Font height

 

 

 

Thanks

Peter

 

 




#53210 Bluetooth + Wlan

Posted by Peter Forstmeier on 15 October 2013 - 05:42 PM

Hi List,

is there any advice what Shields to buy for  Bluetooth and Wlan?

 

Thanks

Peter

 




#53160 VS 2012 Prof

Posted by Peter Forstmeier on 12 October 2013 - 02:48 PM

Hi List,

i just get my Netduino Plus 2 to and installed all the needed Files.

VS 2012 starts and i use the Netduino AllicationPlus template to create a new Project.- Fails:

 

Error Message is:

The projectFile xyc cannot be opened.

There is a missing Project subtype:

Subtype {b69e3092-b931-443cabe7-7e7b65f2a37f} is unsupported by the Installation

 

Any idea

Thanks

Peter




#52905 Netduino Plus vs Netduino Go

Posted by Peter Forstmeier on 25 September 2013 - 11:11 AM

Hi List,

can you give me some advice wath kind of platform (Plus or Go) to buy????

 

my background: Pretty fair knowledge in C#

 

my intention: Home Automation, WebServer, connectiong to WLAN and/or Bluetooth

 

Thanks

Peter

 

 

 

 

 




  1. Netduino Forums
  2. → Viewing Profile: Likes: Peter Forstmeier
  3. Privacy Policy
home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.