Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Controling Mains Power (UK)


  • Please log in to reply
6 replies to this topic

#1 Wayneio

Wayneio

    Member

  • Members
  • PipPip
  • 24 posts

Posted 28 July 2013 - 12:00 PM

Hi, I'm looking at controlling mains appliances with a netduino.

 

Will this product work for UK power (240V)? http://www.seeedstud...ield-p-693.html

I assume it's pretty simple in terms of code, just turning the relay on and off?

 

Also, from anyone's experience, is it still easy to access the other Digital IO ports for controlling other items?



#2 Wayneio

Wayneio

    Member

  • Members
  • PipPip
  • 24 posts

Posted 28 July 2013 - 04:48 PM

Actually scratch that, this looks much safer! http://www.powerswit...es/PSTKKit.aspx

 

The only problem is it's out of stock and looks to have a USA style plug.



#3 Paul Newton

Paul Newton

    Advanced Member

  • Members
  • PipPipPip
  • 724 posts
  • LocationBerkshire, UK

Posted 28 July 2013 - 05:00 PM

EDIT: this reply was for the first part.

 

NO!!

 

The relay board says 70Watts at just 35Volts.

You need a part that is rated for 240Volts AC.

I think the web page is poor given that you have to follow a link to a separate Wiki to find the voltage of the relay contacts.

 

I am not sure your exact requirements, maybe this one from Hobbytronics. Miniature relay board. They have a few others too.

The description says 250VAC and 10 Amps. It can be driven with a TTL signal (you just have to connect it to a GPIO output - it has the driver transistor built in).

This is not a part I have used myself, but I can recomend Hobbytronics for supplying electonic components in the UK.

 

Hope this helps save your project from bursting into flames - Paul

 

Be extra careful with mains projects. If in doubt consult a qualified engineer.



#4 Paul Newton

Paul Newton

    Advanced Member

  • Members
  • PipPipPip
  • 724 posts
  • LocationBerkshire, UK

Posted 28 July 2013 - 05:03 PM

Yes.

Second one looks good.

Probaly better than the relay I suggested beacuase it has a housing to keep fingers out.

Much better to use a module for mains control.

Note that you have to provide you own power cord.

Paul



#5 Wayneio

Wayneio

    Member

  • Members
  • PipPip
  • 24 posts

Posted 28 July 2013 - 05:31 PM

Hi Paul. Thanks for the info. That one you linked looks good, and it's nice and small compared to the options I found, which will be really useful.



#6 Paul Newton

Paul Newton

    Advanced Member

  • Members
  • PipPipPip
  • 724 posts
  • LocationBerkshire, UK

Posted 28 July 2013 - 06:29 PM

Hi Paul. Thanks for the info. That one you linked looks good, and it's nice and small compared to the options I found, which will be really useful.

Better to be safe than small.



#7 Wayneio

Wayneio

    Member

  • Members
  • PipPip
  • 24 posts

Posted 30 July 2013 - 09:32 AM

Better to be safe than small.

 True, but also the price difference was quite big, especially as I will be buying a few.

 

So i'v also bought a cheap plastic box to keep the relay in and fingers out.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.