AS IM NEW TO PUTTY , I WANTED TO KNOW HOW IT CAN BE UTILIZED FOR THE WIRELESS COMMUNICATION OVER THE VIRTUAL COM PORTS TO ESTABLISH THE TTL SERIAL COMMUNICATION WITH THE MICRO CONTROLLERS .
5 replies to this topic
#2
Stefan
-
- Members
-
- 1965 posts
Moderator
- LocationBreda, the Netherlands
Posted 29 January 2013 - 08:51 AM
Hi Alok, and welcome to the Netduino forums.
I'm not sure what you're trying to do, connect a Netduino to the PC and "chat" with it with PuTTY?
You could use a breakout board like this: http://wiki.netduino...-to-Serial.ashx
Then you can select Serial in PuTTY and enter the right COM port.
"Fact that I'm a moderator doesn't make me an expert in things." Stefan, the eternal newb!
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#3
Nevyn
-
- Members
-
- 1072 posts
Advanced Member
- LocationNorth Yorkshire, UK
Posted 29 January 2013 - 09:34 AM
You have tagged this post Arduino and Wixel - are you in the right place?
Regards,
Mark
To be or not to be = 0xFF
Blogging about Netduino, .NET, STM8S and STM32 and generally waffling on about life
Follow @nevynuk on Twitter
#5
bsilvereagle
-
- Members
-
- 11 posts
Member
Posted 31 January 2013 - 01:49 AM
ALOK
You will need something on the computer COM ports sending the wireless and something on the Netduino deciphering it.
XBee's have the potential to do this if the Netduino's can be programmed on the serial lines (not sure if they can be).
#6
Christoc
-
- Members
-
- 127 posts
Advanced Member
- LocationBallwin, MO
Posted 01 February 2013 - 09:51 PM
YOU HAVE TO ENTER THE CORRECT SERIAL PORT AND RIGHT BAUDRATE IN PUTTY - THAN CLICK CONNECT
EDIT: MY KEYBOARD IS DAMAGED; CAPSLOCK IS STUCK - YOURS TOO??
Classic!
View my blog at ChrisHammond.com
Projects: Netduino Tank/Tracked Vehicle, DNNFoos, Random other bits
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
