2 replies to this topic

[chriscalzaretta]

Hello All,

 

I was developing to the netduino plus 2 just fine

 

Then all of the sudden my computer blue screened and i can no longer deploy. I wanted to know if someone could help me a bit here

 

Now in VS it sees the device but i cant deploy to it.. it gets stuck

in MFDeploy it sees the device when i go to try to ping it i cant

 

 

I have tried to follow

http://netduinohacki...duino-plus.html

 

the directions with holding down the button while plugging in the device to a pc.. Which i do that windows see it and installed a STM32 Bootloader driver

MFDeploy.exe does not see the device to erase it.

 

I then tried to change the drivers  in the device manager from stm32 bootloader driver to the netduino but that did not work so i rolled them back.

 

WHen i plug in my device the blue light comes on and then shuts off.

 

Can someone please help me get my device back up and running?

 

Thank you very much

Chris

[Chris Walker]

Hi Chris, Try erasing the board (using STDFU Tester) and then re-flashing it (using ST DFUSE Demonstrator). The instructions and download links are in the latest firmware thread (pinned at the top of this forum). Does that get you back up and running? Welcome to the Netduino community, Chris

[disu]

I've the same problem Chris and I can't erase the board because also STDFU don't see my device

Help me pleese...