Netduino home hardware projects downloads community

Jump to content


Photo

Reset board


  • Please log in to reply
2 replies to this topic

#1 ATXcoder

ATXcoder

    New Member

  • Members
  • Pip
  • 8 posts
  • LocationAustin, Tx

Posted 13 August 2010 - 10:29 PM

I have been having a great time programming my Netduino.I would like to reset all the pins and the button to its original (factory) state. I see the reset pin, but I'm not sure how to use it. Any help? Thanks!

#2 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7118 posts
  • LocationNew York, NY

Posted 13 August 2010 - 11:01 PM

I have been having a great time programming my Netduino.I would like to reset all the pins and the button to its original (factory) state. I see the reset pin, but I'm not sure how to use it. Any help? Thanks!


ATXCoder,

Welcome to the forums!

If you just want to erase your current Netduino App off of your Netduino (which should take it back to "out of box" state):
* Run MFDeploy.exe (from Start menu > Programs > Microsoft .NET Micro Framework 4.1 > Tools)
* Select USB transport; your Netduino should appear in the device dropdown
* Press the ERASE button

If you want to completely wipe off your Netduino and reflash the firmware from scratch:
* Community member Jason posted instructions here: http://forums.netdui...indpost__p__347

Does that take care of your needs?

Chris

#3 ATXcoder

ATXcoder

    New Member

  • Members
  • Pip
  • 8 posts
  • LocationAustin, Tx

Posted 13 August 2010 - 11:44 PM

ATXCoder,

Welcome to the forums!

If you just want to erase your current Netduino App off of your Netduino (which should take it back to "out of box" state):
* Run MFDeploy.exe (from Start menu > Programs > Microsoft .NET Micro Framework 4.1 > Tools)
* Select USB transport; your Netduino should appear in the device dropdown
* Press the ERASE button

If you want to completely wipe off your Netduino and reflash the firmware from scratch:
* Community member Jason posted instructions here: http://forums.netdui...indpost__p__347

Does that take care of your needs?

Chris


Running MFDeploy.exe and hitting "ERASE" reset all the pins. Thanks Chris!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2010-2014 Secret Labs LLC  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.