No problem, we've posted it on the downloads page.I know you've had your hands full, but please do post the Netduino source when you can. I could care less about I2C ;-)
Enjoy!
Chris

  | ||||||||||||||
Netduino Plus 2 Firmware v4.2.1
Started by Chris Walker, Nov 11 2012 01:07 AM
30 replies to this topic
#21Posted 03 December 2012 - 09:05 PM
Hi Howie,
No problem, we've posted it on the downloads page. Enjoy! Chris #22Posted 06 December 2012 - 01:23 AM
Hi Chris, sorry about the confusion on my topic the other day but this is what happened: I don't own a N+ 2 as of yet but placing my order soon though I had a project that was meant for the N+ 2 but didn't realize about it and I was able to deploy it and then the debugger stopped working and my N+ 1 became unresponsive and I had to reflash it with SAM-BA, and then redeployed the firmware to it. So the question I have is: the N+ 2 projects shouldn't be allowed to be deployed to an N+ 1 with Framework v4.2.0, right or this is the expected behaviour? #23Posted 06 December 2012 - 02:46 AM Correct. Netduino Plus 1 projects should start out with the "Netduino Plus" application template. We're working on an updated SDK which will technically make it possible for many projects to work on both...but right now you'll need to swap out the HardwareProvider when switching to Netduino Plus 1. BTW, that all changes with the .NET MF 4.3 SDK. We have a few surprise in store. More on that soon. Chris #24Posted 08 December 2012 - 02:28 AM
Hi --
One more question now that the source is out: what IDEs do you suggest using? You mentioned one that lets you drop down from C# to C++ interop debugging -- that sounds very cool; is it expensive?
Have a good weekend!
Howie
Edited by Howie Goodell, 08 December 2012 - 02:38 AM. #25Posted 08 December 2012 - 02:33 AM
Chris, I just downloaded "netduino plus 2 firmware v4.2.1 source" at http://www.netduino.com/downloads/ . Thanks much! Howie #26Posted 16 June 2015 - 05:01 PM Chris, could you provide the source code in C to compile in gcc? #27Posted 16 June 2015 - 06:00 PM
Hi Lucas,
We use RVCT (RVDS/Keil MDK) to compile the official firmware. A few community members have been using GCC, at least with previous builds...which is something we encourage (but which we aren't set up to officially support at this time). Chris #28Posted 16 June 2015 - 07:51 PM I understood, so could you provide the source code? I have Keil and I prefer that instead GCC, I want study source code for my master's thesis and try to develop an tool for any arm microcontroller. Could you to recommend any book about porting of netmf?
Thanks
Lucas Salomão #29Posted 18 June 2015 - 02:25 AM Chris , could you help me? #30Posted 18 June 2015 - 02:51 AM
Hi Lucas,
No problem, here you go. Source code is available as a download over on the downloads page. Here's a direct link: http://cdn.netduino....rce_4.3.1.0.zip We'll also be checking the NETMF 4.4 source into our github repo a bit later (once NETMF 4.4 is RTM, etc.). Chris #31Posted 18 June 2015 - 02:04 PM Thank you very much Chris!!! 0 user(s) are reading this topic0 members, 0 guests, 0 anonymous users | ||||||||||||||
|
||||||||||||||
This webpage is licensed under a Creative Commons Attribution-ShareAlike License. | ||||||||||||||