8 replies to this topic

[Paolo Patierno]

I had a problem with start debugging in Visual Studio 2010....Vs didn't connect to the board. I have tried to upgrade firmware on Netduino but the MFDeploy blocking on "Connecting to TinyCLR...". So I have disconnected my Netduino board.... Now when I insert Netduino in USB port I get the following message on my status bar : USB device not recognized I have uninstalled and installed the Netduino SDk but it doesn' work ! I can't connected to the board with MFDeploy ! Help !!! Paolo.

[pascal06]

I had a problem with start debugging in Visual Studio 2010....Vs didn't connect to the board.
I have tried to upgrade firmware on Netduino but the MFDeploy blocking on "Connecting to TinyCLR...".
So I have disconnected my Netduino board....
Now when I insert Netduino in USB port I get the following message on my status bar :

USB device not recognized

I have uninstalled and installed the Netduino SDk but it doesn' work !
I can't connected to the board with MFDeploy !

Help !!!
Paolo.

Don't worry

You probably need to reflash the firmware. Here the step-by-Step procedure to do it http://forums.netdui...e-does-not-fix/

Pascal

[Paolo Patierno]

Don't worry

You probably need to reflash the firmware. Here the step-by-Step procedure to do it http://forums.netdui...e-does-not-fix/

Pascal

I have discovered the problem...I try to work with VMWARE !!
On real PC it works !

Thanks,
Paolo

[Chris Walker]

I have discovered the problem...I try to work with VMWARE !!
On real PC it works !

Hi Paolo,

VMWare Fusion can be finicky. We added partial support (deployment with limited debugging) in a firmware update. If you're running old firmware, you may want to update your board anyway...

Chris

[Paolo Patierno]

Hi Paolo,

VMWare Fusion can be finicky. We added partial support (deployment with limited debugging) in a firmware update. If you're running old firmware, you may want to update your board anyway...

Chris

What is the firmware version with this update ?

Thanks,
Paolo

[Chris Walker]

What is the firmware version with this update ?

I believe we added limited VMWare Fusion support in v4.1.0.3.

Chris

[Paolo Patierno]

I believe we added limited VMWare Fusion support in v4.1.0.3.

Chris

Excuse me Chris but I have read that vmware fusion is for Mac, i have vmware workstation...is it also supported ?

Thanks,
Paolo

[Chris Walker]

Excuse me Chris but I have read that vmware fusion is for Mac, i have vmware workstation...is it also supported ?

Not sure: we haven't tested VMWare Workstation. We recommend running on a native machine, generally...we're trying to support VMs where/as possible to provide the best experience, but that will be support which develops more and more over time.

Chris

[Paolo Patierno]

Not sure: we haven't tested VMWare Workstation. We recommend running on a native machine, generally...we're trying to support VMs where/as possible to provide the best experience, but that will be support which develops more and more over time.

Chris

Ok...I will work on native machine...it works fine on it !
Thanks,
Paolo