So I decided to update my netduino plus to 4.2. I went through the steps (erase on gold pad, bootloader, ef config and ef flash). I think it all worked. I get the results below from mfdeploy. All that seems right I guess. However, when I go to deploy a project via VS2010, I get the error "Device not found or cannot be opened - USB:Netduino Plus". I could deploy before the upgrade attempt.
So my question is: did I somehow flash the wrong thing or do it the wrong way? Or is there something in VS2010 I need to change?
Other things I tried: I switched the project's settings from USB to Serial, then back again, with the USB name being NetDuino_NetDuino.
On more interesting note: after doing all of this, the program that had been on the Netduino was still on there. Maybe that's normal, but I'm trying to give all the info I can.
Thanks for any help you can give.
Ping Result
Pinging... TinyCLR
Capabilities
HalSystemInfo.halVersion: 4.2.0.0
HalSystemInfo.halVendorInfo: Netduino (v4.2.0.0) by Secret Labs LLC
HalSystemInfo.oemCode: 34
HalSystemInfo.modelCode: 177
HalSystemInfo.skuCode: 4096
HalSystemInfo.moduleSerialNumber: 00000000000000000000000000000000
HalSystemInfo.systemSerialNumber: 0000000000000000
ClrInfo.clrVersion: 4.2.0.0
ClrInfo.clrVendorInfo: Netduino (v4.2.0.0) by Secret Labs LLC
ClrInfo.targetFrameworkVersion: 4.2.0.0
SolutionReleaseInfo.solutionVersion: 4.2.0.0
SolutionReleaseInfo.solutionVendorInfo: Netduino (v4.2.0.0) by Secret Labs LLC
SoftwareVersion.BuildDate: Aug 12 2012
SoftwareVersion.CompilerVersion: 410894
FloatingPoint: True
SourceLevelDebugging: True
ThreadCreateEx: True
LCD.Width: 0
LCD.Height: 0
LCD.BitsPerPixel: 0
AppDomains: True
ExceptionFilters: True
IncrementalDeployment: True
SoftReboot: True
Profiling: False
ProfilingAllocations: False
ProfilingCalls: False
IsUnknown: False
Firmware update issue / VS issue
Started by John West, Aug 27 2012 03:44 PM
5 replies to this topic
#1
Posted 27 August 2012 - 03:44 PM
#2
Posted 27 August 2012 - 06:05 PM
You did flash the Netduino Plus version and not the non plus version ... right ?
Its just that looking at the report it says "HalSystemInfo.halVendorInfo: Netduino (v4.2.0.0) by Secret Labs LLC"
Just a thought
Cheers Pete.
Its just that looking at the report it says "HalSystemInfo.halVendorInfo: Netduino (v4.2.0.0) by Secret Labs LLC"
Just a thought
Cheers Pete.
I was going to change the world, then I discovered Netduino.
The world will have to wait.
The world will have to wait.
#3
Posted 27 August 2012 - 06:21 PM
have you uninstalled the previous sdk's and installed the latest SDK?
Nak.
#4
Posted 28 August 2012 - 07:32 PM
Hi John,
As Pete mentioned... It looks like your board got flashed with the "regular Netduino" firmware instead of "Netduino Plus."
You can do this, but you'll lose the networking feature on your Netduino and you'll need to change the deployment name in project properties as you have done.
If you erase and reflash using the Netduino Plus firmware instead, you should be good to go.
Please let us know how that goes and if we can be of further assistance.
Chris
#5
Posted 28 August 2012 - 07:33 PM
Thanks. I should have responded last night. That was indeed my problem. I had thought I was flashing the Plus firmware, but I was wrong. Once I did that, everything worked great.
#6
Posted 01 September 2012 - 12:04 AM
Thanks. I should have responded last night. That was indeed my problem. I had thought I was flashing the Plus firmware, but I was wrong. Once I did that, everything worked great.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users