Netduino home hardware projects downloads community

Jump to content


The Netduino forums have been replaced by new forums at community.wildernesslabs.co. This site has been preserved for archival purposes only and the ability to make new accounts or posts has been turned off.
Photo

Where is the gold erase pad on the Netduino Plus?


  • Please log in to reply
1 reply to this topic

#1 James

James

    Advanced Member

  • Members
  • PipPipPip
  • 56 posts

Posted 02 July 2012 - 03:02 AM

I can easily see the gold erase pad on the original Netduino - it's a square contact adjacent to Digital I/O Pin 0. However, on the Netduino Plus that same area has a smaller pad that looks silver and almost appears to have a dab of solder (not from me) on it. I probably have one of the earlier runs on the N+ if that makes any difference. Thanks!

#2 Chris Walker

Chris Walker

    Secret Labs Staff

  • Moderators
  • 7767 posts
  • LocationNew York, NY

Posted 02 July 2012 - 03:27 AM

Hi James,

I can easily see the gold erase pad on the original Netduino - it's a square contact adjacent to Digital I/O Pin 0. However, on the Netduino Plus that same area has a smaller pad that looks silver and almost appears to have a dab of solder (not from me) on it. I probably have one of the earlier runs on the N+ if that makes any difference. Thanks!

The first ~200 units of Netduino Plus had a tiny bit of solder on top of the gold erase pad. It's in exactly the same place as on Netduino. If you see a silver pad there, go ahead and use that as the erase pad.

Chris




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

home    hardware    projects    downloads    community    where to buy    contact Copyright © 2016 Wilderness Labs Inc.  |  Legal   |   CC BY-SA
This webpage is licensed under a Creative Commons Attribution-ShareAlike License.