PC rebooting on NetduinoPlus Disconnect
Started by ZakieM, Apr 12 2012 08:31 AM
11 replies to this topic
#1
Posted 12 April 2012 - 08:31 AM
After I installed the 4.2 drivers, I got my PC rebooting on disconnecting NetduinoPlus but not always. The phenomena also included PC reset on pressing the NetduinoPlus on-board reset pin (the two developed too strong attachment )
I now downgraded the Netduino itself to 4.1.06 again (not enough code space for my program in 4,2).
PC Information:
Windows 7 64bit (fully updates from MS)
VS 2010 Professional v 10.0.40219.1 SP1 Rel
NetduinoPlus Driver information:
(right click on the NetduinoPlus device in device manager)
6.1.7600.16385 by WinDDK
.
I now downgraded the Netduino itself to 4.1.06 again (not enough code space for my program in 4,2).
PC Information:
Windows 7 64bit (fully updates from MS)
VS 2010 Professional v 10.0.40219.1 SP1 Rel
NetduinoPlus Driver information:
(right click on the NetduinoPlus device in device manager)
6.1.7600.16385 by WinDDK
.
Zakie Mashiah
Just a curious guy
Just a curious guy
#2
Posted 21 April 2012 - 07:27 AM
I have the same problem with a regular Netduino !!!! VERY ANNOYING
#3
Posted 21 April 2012 - 07:42 AM
Does anyone have a fix for this. I can not upload a program to my N as it sits on the preparing to deploy and unplugging or pressing reset kills the computer.
#4
Posted 21 April 2012 - 08:33 AM
Hi,
there is already another thread which decribes this behaviour.
There is no fix but repro steps in there: Drivers for .NET MF 4.2
Ok, I'm not really helping here. But I'm frustrated by BSOD too and I'm unsure what to do.
Should I open a bug in Codeplex? I've posted the repro but in the last week there was no response.
Guido
there is already another thread which decribes this behaviour.
There is no fix but repro steps in there: Drivers for .NET MF 4.2
Ok, I'm not really helping here. But I'm frustrated by BSOD too and I'm unsure what to do.
Should I open a bug in Codeplex? I've posted the repro but in the last week there was no response.
Guido
#5
Posted 21 April 2012 - 08:34 AM
I tried to look for your response but I couldn't find it.
Good plan. Give me the link so I can vote on it.
I reverted back to 4.1 for the time being
#6
Posted 21 April 2012 - 10:07 AM
Hi ZakieM, smarcus3:
Please try the 4.2 drivers that gbreder just mentioned, and let me know if these reduce/eliminate the BSOD issue you're seeing on disconnect.
Chris
#7
Posted 21 April 2012 - 10:19 AM
Ok. Ill let you know how it goes.
#9
Posted 21 April 2012 - 09:31 PM
Hi smarcus,
at last I've posted the issue in Codeplex.
Please vote for it. If something should be added or changed please send me a message.
Guido
P.S. There is another bug I'm interrested in: Read on a disconnected I2C Bus takes forever. If you like, try the repro and send me your result (with your board and firmware) and of course your opinion
at last I've posted the issue in Codeplex.
Please vote for it. If something should be added or changed please send me a message.
Guido
P.S. There is another bug I'm interrested in: Read on a disconnected I2C Bus takes forever. If you like, try the repro and send me your result (with your board and firmware) and of course your opinion
#11
Posted 22 April 2012 - 05:01 AM
For me uninstalling Secretlabs SDK and .NETMF and the re-installing 4.1 helped (and it uninstalled GHI too).
The 4.2 was somewhat useless for my project as I could not fit the program into memory of the N+.
Zakie Mashiah
Just a curious guy
Just a curious guy
#12
Posted 22 April 2012 - 06:39 AM
Too much of a pain. Transferred back to 4.1 again for like the fifth time
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users