Hello All,
I wanted to know if you are are able to create a barebones netduino(Say on a breadboard) like a Arduino. Obviously the Atmel Chip may be hard to get onto a breadboard but more realisticly on a custom made PCB.
Thanks Mitchell.
(Sorry about any spelling mistakes)
Barebones Netduino
Started by Mitchell, Jan 20 2012 12:48 PM
5 replies to this topic
#2
Geancarlo
-
- Members
-
- 24 posts
Member
#3
Mitchell
-
- Members
-
- 7 posts
New Member
Posted 27 January 2012 - 01:00 PM
Kinda. I want to be able to use the .Net Micro Framework with a 32bit AVR processor and have it all on a custom PCB. I once worked with Arduino's and I know that you can do this quite easly with their 8bit Atmega328.
Really I just wanted to know, if I got my hands on a AVR IC, can I use it witout any extra electronics.
#4
Chris Walker
-
- Moderators
-
- 7767 posts
Secret Labs Staff
- LocationNew York, NY
Posted 27 January 2012 - 10:08 PM
Hi Mitchell,
Today's AVR32's don't have enough Flash/RAM for the .NET Micro Framework.
You could pick up a SAM7X microcontroller and build a custom PCB using the Netduino firmware though...
Chris
#5
Mitchell
-
- Members
-
- 7 posts
New Member
Posted 02 February 2012 - 10:03 AM
Thankyou Chris for the Reply, Do you know of any good Australian Stores I can get one from?
#6
Chris Walker
-
- Moderators
-
- 7767 posts
Secret Labs Staff
- LocationNew York, NY
Posted 02 February 2012 - 01:43 PM
Hi Mitchell,
Will Mouser ship to your country?
Chris
I wish I knew Australian stores. Sounds like a good excuse for a vacation (I mean "research trip").Thankyou Chris for the Reply, Do you know of any good Australian Stores I can get one from?
Will Mouser ship to your country?
Chris
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
