Request for forum
#1
Posted 01 November 2011 - 04:05 PM
#2
Posted 01 November 2011 - 04:51 PM
#3
Posted 01 November 2011 - 07:57 PM
#4
Posted 03 November 2011 - 04:24 AM
#5
Posted 03 November 2011 - 04:55 AM
#6
Posted 03 November 2011 - 08:22 AM
As you may see, my English is rough, just because I never learn it (seriously in the school).
Mario, your English is far better than my attempts at writing or speaking any language other than English.
As for non-English forums I am not sure if this is a good idea. Not because I have problems with other languages but simply because you will reduce the number of people who will read your post. You will therefore reduce the chance of having any questions answered.
Regards,
Mark
To be or not to be = 0xFF
Blogging about Netduino, .NET, STM8S and STM32 and generally waffling on about life
Follow @nevynuk on Twitter
#7
Posted 03 November 2011 - 09:08 AM
But having multiple languages it would get more difficult to monitor/moderate posts. It looks like nothing is moderated but I can tell I remove quite a lot of spam. If posts were in Italian, I wouldn't be able to see if it's spam or not without using translating software myself, which would take too much time.
French and German I could read a tiny bit, but also not well enough to act to it.
Then there's the issue of localisation. The forum software is in English. That should also be available in other languages. So it would also require a change to the website. If you do the forums in Italian, it wuold be nice if all other pages of the website were in Italian.
Good point! That's also a good reason to keep everything in English.Not because I have problems with other languages but simply because you will reduce the number of people who will read your post. You will therefore reduce the chance of having any questions answered.
You're English is way better then the English I read from some native speakersAs you may see, my English is rough, just because I never learn it (seriously in the school).
I commonly notice I use Dunglish instead of English, but by using the English language I learn a second language and learn something about electronics at the same time.
My .NETMF projects: .NETMF Toolbox / Gadgeteer Light / Some PCB designs
#8
Posted 05 November 2011 - 12:13 PM
#9
Posted 08 November 2011 - 02:07 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users