Followed these instructions to upgrade to 4.2.0.0 RC3 and SDKs. Erased and flashed to 4.2 RC3.
http://forums.netdui...?showtopic=2768
http://wiki.netduino...ep-by-step.ashx
http://wiki.netduino...shx?HL=firmware
http://forums.netdui...c3-all-editions
When I start debug to load a simple program, I get: Cannot deploy the base assembly 'mscorlib', or any of his satellite assemblies, to device - USB:NetduinoPlus twice. Assembly 'mscorlib' on the device has version 4.1.2821.0, while the program is trying to deploy version 4.2.0.0
Where did I screw up? Thanks...Scott
Tried to update to 4.2 RC3 - getting mscorlib error
Started by pugtech, Oct 27 2011 03:52 AM
4 replies to this topic
#2
Chris Walker
-
- Moderators
-
- 7767 posts
Secret Labs Staff
- LocationNew York, NY
Posted 27 October 2011 - 03:59 AM
Hi Scott,
Try pinging the device from MFDeploy, and then request the Device Capabilities. I think that you may have accidentally re-flashed your board with .NET MF 4.1 instead of .NET MF 4.2 
Or at least that's what the error is saying...
Chris
Or at least that's what the error is saying...
Chris
#3
pugtech
-
- Members
-
- 18 posts
Member
- LocationScotts Valley, CA
Posted 27 October 2011 - 04:02 AM
You're right. I have no idea how I managed that. I know at one point it responded as 4.2.0.0. I'll try again. Thanks!
#4
pugtech
-
- Members
-
- 18 posts
Member
- LocationScotts Valley, CA
Posted 27 October 2011 - 04:05 AM
I see where I went wrong. The SAM-BA worked but I selected the ER files from the default folder.
#5
pugtech
-
- Members
-
- 18 posts
Member
- LocationScotts Valley, CA
Posted 27 October 2011 - 04:11 AM
That fixed it. Thanks again!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
