1 reply to this topic

[Carlos]

Hi!.

I have a trouble. I have 2 steppers and i want to control one of them with easydriver. the first time that i tried i can make it work, but i lost the wiring config and i was searching on the web for a specsheet, but i can't find anything. I did find a related topic asking info about the same stepper, but with no solution about specsheet.

This are the steppers:


and on the first time i tried copying the wiring config of this image and it works (i tried with the stepper that has the same color on wire, or almost same color)


So now i cant make it work.

When i tried to make it run it seems to be stuck and the stepper and the easydriver gets hotter.

Thanks in advance.
P.D: Sorry for my english.

[Nevyn]

So now i cant make it work.

When i tried to make it run it seems to be stuck and the stepper and the easydriver gets hotter.

Carlos,

Not sure if this will help but Sparkfun ran a new product post featuring stepper motors on Friday. In the post they explain how the motors work and how to work out the internal wiring.

Hope this helps,
Mark